Skip to Content
Last modified by Alexander Mott on 2024/02/13 22:29
From version 1.1
edited by Mark Kohlmann
on 2022/08/17 20:49
Change comment: There is no comment for this version
To version 2.1
edited by Mark Kohlmann
on 2022/08/17 21:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,11 +2,30 @@
2 2  
3 3  (% style="margin-right:auto; width:800px" %)
4 4  |=Function|=APP Mode|=Legacy Mode
5 -|Address Fixtures|Using Zum App on Phone/Tablet|(((
5 +|Address and Group Fixtures|Zum App on Phone/Tablet|(((
6 6  * showrunner UI
7 -* Toolbox
8 -* Console
7 +* Toolbox DALI Commissioning Tool
8 +* Console (same as DIN-DALI-2)
9 9  )))
10 -| | |(((
11 -
10 +|Lighting Logic|Internal to Zum Room, can be enhanced by showrunner|(((
11 +showrunner only, same as DIN-DALI-2
12 12  )))
13 +|Configuration Steps|(% style="width:350px" %)(((
14 +1. Update Firmware to 1.3.27 puf or later
15 +1. Connect to ZUMNET-JBOX Console
16 +1. Enter Command: //DALISETMODE 1 2//
17 +1. Wait 5 seconds, ZUMNET JBOX should reboot, if not reboot
18 +1. Enter Command: //ZWMODE ZUM//
19 +1. Reboot
20 +)))|(% style="width:350px" %)(((
21 +1. Update Firmware to 1.3.27 puf or later
22 +1. Connect to ZUMNET-JBOX Console
23 +1. Enter Command: //ZWMODE CNET//
24 +1. Reboot
25 +1. Enter Command: //DALISETMODE 1 1//
26 +1. Wait 5 seconds, ZUMNET JBOX should reboot, if not reboot
27 +)))
28 +|Known Issues|(((
29 +* All fixtures/groups must be setup through the app.  If not done through the app then controls do not work from the app or showrunner.  There is no way to discover existing groupings.  Requires complete re-address and group.
30 +* TEST button only controls defined groups and not broadcast (Crestron says they will revert this back to broadcast in a future release)
31 +)))|