Wiki source code of GLPAC (Cresnet)

Version 14.1 by Craig Lewis on 2022/08/25 21:18

author	version	line-number	content
		1	Older systems with GLPACs wired to the processor via Cresnet can be added to showrunner™ by created a program for slot 2.
		2
		3	* Create a SIMPL windows program
		4	* Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
		5	* Define the Level In and Level Out analog signals on the GLPAC Remote Standard Intersystem Communications
		6
		7	[[image:1660773651340-476.png]]
		8
		9	* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
		10	* In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address)
		11
		12	[[image:image-20220817145415-2.png]]
		13
		14	* Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
		15
		16	[[image:1660773665229-324.png]]
		17
		18	* In the showrunner™ config, the lighting controller will be defined with the following settings
		19	** Controller Type = "3SeriesEisc"
		20	** ID and Device Connection Id = IP ID used
		21	** Properties Value = "127.0.0.2"
		22	** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog signals
		23
		24	[[image:image-20220817145415-4.png]]