Skip to Content

Changes for page Legacy Hardware (Cresnet)

Last modified by Craig Lewis on 2024/12/02 14:48
From version 11.4
edited by Craig Lewis
on 2022/08/18 16:55
Change comment: There is no comment for this version
To version 11.2
edited by Craig Lewis
on 2022/08/18 16:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,24 +3,16 @@
3 3  
4 4  * Create a SIMPL windows program
5 5  * Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
6 +* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
6 6  * Define the Level In and Level Out analog signals on each of the GLPAC Remote Standard Intersystem Communications
7 7  
8 8  [[image:1660773651340-476.png]]
9 9  
10 -* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
11 -* In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address)
11 +* Copy the Level In and Level Out signals and past them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
12 12  
13 -[[image:image-20220817145415-2.png]]
14 -
15 -* Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
16 -
17 17  [[image:1660773665229-324.png]]
18 18  
19 -* In the showrunner config, the lighting controller will be defined with the following settings
20 -** Controller Type = "3SeriesEisc"
21 -** ID and Device Connection Id = IP ID used
22 -** Properties Value = "127.0.0.2"
23 -** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog Symbols
15 +[[image:image-20220817145415-2.png]]
24 24  
25 25  
26 26  [[image:image-20220817145415-4.png]]