Skip to Content

Changes for page Legacy Hardware (Cresnet)

Last modified by Craig Lewis on 2024/12/02 14:48
From version 11.2
edited by Craig Lewis
on 2022/08/18 16:48
Change comment: There is no comment for this version
To version 11.5
edited by Craig Lewis
on 2022/08/18 16:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,18 +1,25 @@
1 -Older systems with GLPACs wired back to the processor via Cresnet can be added by created a program for slot 2.
1 +Older systems with GLPACs wired to the processor via Cresnet can be added by created a program for slot 2.
2 2  
3 -
4 4  * Create a SIMPL windows program
5 5  * Add the GLPAC-DIMFLV8 (Cresnet) to the appropriate Cresnet IDs
6 -* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
7 7  * Define the Level In and Level Out analog signals on each of the GLPAC Remote Standard Intersystem Communications
8 8  
9 9  [[image:1660773651340-476.png]]
10 10  
11 -* Copy the Level In and Level Out signals and past them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
9 +* Add a 3 Series TCP/IP Ethernet Intersystem Communications to the appropriate Ethernet ID
10 +* In Device Settings, set the Default IP Address to 127.0.0.2 (Loop back address)
12 12  
12 +[[image:image-20220817145415-2.png]]
13 +
14 +* Copy the GLPACs Level In and Level Out signals and paste them to the 3 Series TCP/IP Ethernet Intersystem Communications Analog signals
15 +
13 13  [[image:1660773665229-324.png]]
14 14  
15 -[[image:image-20220817145415-2.png]]
18 +* In the showrunner config, the lighting controller will be defined with the following settings
19 +** Controller Type = "3SeriesEisc"
20 +** ID and Device Connection Id = IP ID used
21 +** Properties Value = "127.0.0.2"
22 +** Loads Index for each load = the analog joins defined in the SIMPL program EISC Analog Symbols
16 16  
17 17  
18 18  [[image:image-20220817145415-4.png]]