Wiki source code of DHCP Server
Version 2.2 by Alexander Mott on 2022/06/17 17:45
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | SHOWRUNNER™ v3.009 introduced an internal DHCP Server that can be enabled to assist with setup. SHOWRUNNER™ v3.010 adds a page to the showrunnerHUB™ UI to make enabling or disabling the DHCP server easier. This eliminates the need to run a personal router or third party software to address devices on the local network. | ||
| 2 | |||
| 3 | ====== Caveats/Notes: ====== | ||
| 4 | |||
| 5 | * The DHCP Server cannot be enabled on processors with routers (PROx/AVx/CPxN), since these processors already have built in DHCP Servers on their Control Subnet | ||
| 6 | * The DHCP Server cannot be enabled on VC-4 instances. | ||
| 7 | * The internal DHCP Server is not designed to be used in production and can only be enabled manually | ||
| 8 | * The DHCP Server is never enabled at startup | ||
| 9 | * Subnet Mask, Gateway, and DNS Server are imported from the processor's own settings | ||
| 10 | |||
| 11 | ====== Configuring the DHCP Server from showrunnerHUB™: ====== | ||
| 12 | |||
| 13 | This feature is coming soon. | ||
| 14 | |||
| 15 | ====== Configuring DHCP Server from the Console: ====== | ||
| 16 | |||
| 17 | Console Commands set the start address as the processor IP Address + 10. The end address as the processor IP Address + 10 + 1/2 the size of the subnet. | ||
| 18 | |||
| 19 | Example for Processor IP Address of 10.0.0.10 and a Subnet Mask of 255.255.255.0 (/24): | ||
| 20 | Start Address: 10.0.0.20 | ||
| 21 | End Address: 10.0.0.147 | ||
| 22 | |||
| 23 | * Enabling: //sr dhcp server enable// | ||
| 24 | * Disabling~:// sr dhcp server disable// | ||
| 25 | * Viewing Addresses: //sr dhcp server bindings// |