Skip to Content

Changes for page DHCP Server

Last modified by Scott Kohlmann on 2023/04/21 14:07
From version 3.1
edited by Alexander Mott
on 2022/06/17 17:53
Change comment: There is no comment for this version
To version 2.3
edited by Alexander Mott
on 2022/06/17 17:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,15 +1,14 @@
1 -SHOWRUNNER™ now includes an internal DHCP server to make large startups even easier, without the need to run a personal router or third party software to address devices on the local network. Assigning IP addresses using a DHCP server makes it possible to discover devices in the Device Discovery Tool and connect to them via Ethernet for further configuration.
1 +SHOWRUNNER™ now includes a built-in DHCP server to make large startups even easier, without the need to run a personal router or third party software to address devices on the local network.
2 2  
3 3  There are a few caveats:
4 4  
5 5  * The DHCP Server cannot be enabled on processors with routers (PROx/AVx/CPxN), since these processors already have built in DHCP Servers on their Control Subnet
6 -* The DHCP Server cannot be enabled on VC-4 instances
7 -* The internal DHCP Server is not designed to be used in production and can only be enabled manually. Devices should still be configured with static IP addresses
6 +* The DHCP Server cannot be enabled on VC-4 instances.
7 +* The internal DHCP Server is not designed to be used in production and can only be enabled manually
8 8  * The DHCP Server is never enabled at startup
9 9  * Subnet Mask, Gateway, and DNS Server are imported from the processor's own settings
10 -* Certain devices (such as GLPACs and GL-IPACs) may refuse to accept a DHCP assigned address if they have been powered up for a period of time without a DHCP server on the network. Power cycling them should resolve this issue
11 11  
12 -====== Configuring DHCP Server from the Console (SHOWRUNNER™ v3.009+): ======
11 +====== Configuring DHCP Server from the Console: ======
13 13  
14 14  Console Commands set the start address as the processor IP Address + 10.  The end address as the processor IP Address + 10 + 1/2 the size of the subnet.
15 15  
... ... @@ -21,6 +21,6 @@
21 21  * Disabling~:// sr dhcp server disable//
22 22  * Viewing Addresses: //sr dhcp server bindings//
23 23  
24 -====== Configuring the DHCP Server from showrunnerHUB™ (SHOWRUNNER™ v3.010+): ======
23 +====== Configuring the DHCP Server from showrunnerHUB™: ======
25 25  
26 26  This feature is coming soon.