Skip to Content

Changes for page DHCP Server

Last modified by Scott Kohlmann on 2023/04/21 14:07
From version 2.3
edited by Alexander Mott
on 2022/06/17 17:47
Change comment: There is no comment for this version
To version 1.1
edited by Mark Kohlmann
on 2021/09/24 15:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,13 +1,17 @@
1 -SHOWRUNNER™ now includes a built-in DHCP server to make large startups even easier, without the need to run a personal router or third party software to address devices on the local network.
1 +ShowRunner version 3.009 or newer has an internal DHCP Server that can be enabled to assist with setup.  This eliminates the need to run a personal router to address devices on the local network.
2 2  
3 -There are a few caveats:
3 +====== Caveats/Notes: ======
4 4  
5 -* The DHCP Server cannot be enabled on processors with routers (PROx/AVx/CPxN), since these processors already have built in DHCP Servers on their Control Subnet
5 +* The DHCP Server cannot be enabled on processors with routers (PROx/AVx/CPxN).
6 6  * The DHCP Server cannot be enabled on VC-4 instances.
7 -* The internal DHCP Server is not designed to be used in production and can only be enabled manually
8 -* The DHCP Server is never enabled at startup
9 -* Subnet Mask, Gateway, and DNS Server are imported from the processor's own settings
7 +* The internal DHCP Server is not designed to be used in production and can only be enabled manually.
8 +* The DHCP Server is never enabled at startup.
9 +* Subnet Mask, Gateway, and DNS Server are imported from the processor's own settings.
10 10  
11 +====== Configuring the DHCP Server from showrunner HUB: ======
12 +
13 +This feature is coming soon.
14 +
11 11  ====== Configuring DHCP Server from the Console: ======
12 12  
13 13  Console Commands set the start address as the processor IP Address + 10.  The end address as the processor IP Address + 10 + 1/2 the size of the subnet.
... ... @@ -17,9 +17,5 @@
17 17  End Address: 10.0.0.147
18 18  
19 19  * Enabling: //sr dhcp server enable//
20 -* Disabling~:// sr dhcp server disable//
24 +* Disabling~:// sr dhscp server disable//
21 21  * Viewing Addresses: //sr dhcp server bindings//
22 -
23 -====== Configuring the DHCP Server from showrunnerHUB™: ======
24 -
25 -This feature is coming soon.