Skip to Content

Changes for page DHCP Server

Last modified by Scott Kohlmann on 2023/04/21 14:07
From version 2.2
edited by Alexander Mott
on 2022/06/17 17:45
Change comment: There is no comment for this version
To version 2.3
edited by Alexander Mott
on 2022/06/17 17:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,6 @@
1 -SHOWRUNNER™ v3.009 introduced an internal DHCP Server that can be enabled to assist with setup. SHOWRUNNER™ v3.010 adds a page to the showrunnerHUB™ UI to make enabling or disabling the DHCP server easier. This eliminates the need to run a personal router or third party software to address devices on the local network.
1 +SHOWRUNNER™ now includes a built-in DHCP server to make large startups even easier, without the need to run a personal router or third party software to address devices on the local network.
2 2  
3 -====== Caveats/Notes: ======
3 +There are a few caveats:
4 4  
5 5  * The DHCP Server cannot be enabled on processors with routers (PROx/AVx/CPxN), since these processors already have built in DHCP Servers on their Control Subnet
6 6  * The DHCP Server cannot be enabled on VC-4 instances.
... ... @@ -8,10 +8,6 @@
8 8  * The DHCP Server is never enabled at startup
9 9  * Subnet Mask, Gateway, and DNS Server are imported from the processor's own settings
10 10  
11 -====== Configuring the DHCP Server from showrunnerHUB™: ======
12 -
13 -This feature is coming soon.
14 -
15 15  ====== Configuring DHCP Server from the Console: ======
16 16  
17 17  Console Commands set the start address as the processor IP Address + 10.  The end address as the processor IP Address + 10 + 1/2 the size of the subnet.
... ... @@ -23,3 +23,7 @@
23 23  * Enabling: //sr dhcp server enable//
24 24  * Disabling~:// sr dhcp server disable//
25 25  * Viewing Addresses: //sr dhcp server bindings//
22 +
23 +====== Configuring the DHCP Server from showrunnerHUB™: ======
24 +
25 +This feature is coming soon.