Skip to Content

Wiki source code of Crestron Command Line

Version 5.1 by Craig Lewis on 2021/07/12 17:31
Show last authors
1 __**Frequently used commands:**__
2
3 Autodiscovery Query - scans network for all connected Crestron network devices
4
5 VERsion Operator Version Command
6
7 Est - shows IP Configurations of connected device (same command as ipconfig)
8
9 DHCP Administrator Enable/disable dynamic IP addressing
10
11 IPAddress Administrator Set IP address
12
13 IPCONFIG Operator Display/Configure IP Settings
14
15 IPMask Administrator Set IP Subnet Mask.
16
17 IPTable Operator Display IP Table
18
19 DEFRouter Administrator Set default router
20
21 ADDDns Administrator Add an entry to DNS server List
22
23
24 ADDMaster Programmer Add a master entry to IP table
25
26 REMMaster Programmer Remove a master entry to IP table
27
28
29 ADDSlave  Programmer Add a slave entry to IP table
30
31 REMSlave  Programmer Remove a slave entry to IP table
32
33
34
35 HELP - Detailed help available. 
36
37 Type a command followed by a space and '?' to see options for that command (i.e. HELP ?)
38
39 HELP ALL will display a list of all commands.
40
41 HELP DEVice will display a list of commands specific to this device.
42
43 HELP ETHERnet will display a list of Ethernet commands.
44
45 HELP FILE will display a list of commands for file operations.
46
47 HELP SYStem will display a list of general system commands.
48
49 HELP RF will display a list of commands for the radio chip if available.
50
51 HELP OSD will display a list of commands for the on-screen-display if available.
52
53 HELP RAVA will display a list of commands for RAVA VOIP if available.
54
55 HELP BACNET will display a list of commands for the BACNET stack if available.
56
57 HELP USER will display a list of commands added to the system by user programs.
58
59 HELP CRESTIMERENG will display a list of commands for the Crestron Timer Engine.
60
61 HELP xxx* will display a list of commands starting with xxx.
62
63