Crestron Command Line

Frequently used commands:

Autodiscovery Query - scans network for all connected Crestron network devices

VERsion                  Operator           Version Command

Est - shows IP Configurations of connected device (same command as ipconfig)

DHCP                     Administrator      Enable/disable dynamic IP addressing

IPAddress                Administrator      Set IP address

IPCONFIG                 Operator           Display/Configure IP Settings

IPMask                   Administrator      Set IP Subnet Mask.

IPTable                  Operator           Display IP Table

DEFRouter                Administrator      Set default router

ADDDns                   Administrator      Add an entry to DNS server List

ADDMaster                Programmer         Add a master entry to IP table

REMMaster                Programmer         Remove a master entry to IP table

ADDSlave               Programmer         Add a slave entry to IP table

REMSlave                Programmer         Remove a slave entry to IP table

HELP - Detailed help available.  

Type a command followed by a space and '?' to see options for that command (i.e. HELP ?)

HELP ALL will display a list of all commands.

HELP DEVice will display a list of commands specific to this device.

HELP ETHERnet will display a list of Ethernet commands.

HELP FILE will display a list of commands for file operations.

HELP SYStem will display a list of general system commands.

HELP RF will display a list of commands for the radio chip if available.

HELP OSD will display a list of commands for the on-screen-display if available.

HELP RAVA will display a list of commands for RAVA VOIP if available.

HELP BACNET will display a list of commands for the BACNET stack if available.

HELP USER will display a list of commands added to the system by user programs.

HELP CRESTIMERENG will display a list of commands for the Crestron Timer Engine.

HELP xxx* will display a list of commands starting with xxx.