Skip to Content

Wiki source code of Custom Logo

Version 17.1 by Alexander Mott on 2023/10/30 20:23
Show last authors
1 {{box title="**CONTENTS**"}}
2 {{toc/}}
3 {{/box}}
4
5 (% class="row" %)
6 (((
7 = Custom Logo Guidelines =
8
9 To use a custom logo in your ShowRunnerCLC™ project, you should first create a custom logo per the following guidelines.
10
11 Custom logos should have a white background and be in .png format with a resolution of 1280x800 for compatibility with the widest range of of touch screens.
12
13 * TSW-770 and TSW-1060 screens have an aspect ratio of 16:10 and a native resolution of 1280x800.
14 * TSW-1070 screens have an aspect ratio of 16:10 and a native resolution 1920x1200.
15 * TSW-760 screens have an aspect ratio of 17:10 and a native resolution of 1024x600.
16
17 = Loading a Custom Logo to the Processor =
18
19 Once a custom logo has been created, it must be loaded to the processor (not to the touchscreen itself).
20
21 * Start Crestron Toolbox and open the File Manager tool
22 * Connect to the lighting control processor that the TSW touch screen is pointed at
23 * Select "Internal Flash" from the list on the left
24 * Select "HTML" from the list on the left
25 * Right-click in an empty area on the right and select "Copy File(s) From..."
26 * Select your custom logo .png file and load it to the processor
27
28 [[image:1591724546339-953.png]]
29
30 = Updating the Lighting Configuration File =
31
32 Once the logo has been loaded to the processor, it is necessary to update the lighting configuration file.
33
34 * First, pull the configuration file using either ShowRunner's File Management page (recommended), or pull it directly from the processor using Toolbox's File Manager tool. 
35 ** If using Toolbox's File Manager tool, the config will be located in one of two places:
36 "NVRAM/sr/default/SrConfig.json" for ShowRunner versions 3.011 and newer
37 "NVRAM/CiLightingConfig.json" for ShowRunner versions 3.010 and older
38 * Open the configuration file in a text editor and the locate the "CustomLogoFile" line towards the bottom of the config:
39 [[image:1591724611629-257.png]]
40 * Change the value ##null ##to the name of your custom logo file:
41 [[image:1591724595422-172.png]]
42 * Save the updated configuration file
43 * Load the updated configuration file to your processor using either ShowRunnerCLC's™ File Management page or using Toolbox
44 ** If using Toolbox, navigate to either:
45 "NVRAM/sr/default" for ShowRunnerCLC™ versions 3.011 and newer
46 "NVRAM" for ShowRunner versions 3.010 and older
47 ** Open Text Console and connect to the processor and type the## progreset## command and then press enter to restart the processor and finish loading the config
48
49 = Custom Logos on Processors with Authentication Enabled =
50
51 If your project is running on a 3-series with authentication enabled or a 4-series with user page authentication enabled, you will need to follow [[these additional steps>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.Resolving Custom Logo Not Loading on Touchscreens with Authentication on processor Enabled.WebHome]].
52 )))