Wiki source code of VC-4 Setup
Version 14.1 by Alexander Mott on 2023/05/15 20:48
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="box errormessage" %) | ||
| 2 | ((( | ||
| 3 | This page is for VC-4 deployments. For other processors, see our [[normal processor setup page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.WebHome]]. | ||
| 4 | ))) | ||
| 5 | |||
| 6 | (% class="box warningmessage" %) | ||
| 7 | ((( | ||
| 8 | ShowRunnerCLC™ on VC-4 requires version 4.000.0007 of VC-4 | ||
| 9 | ))) | ||
| 10 | |||
| 11 | {{box cssClass="floatinginfobox" title="**CONTENTS**"}} | ||
| 12 | {{toc/}} | ||
| 13 | {{/box}} | ||
| 14 | |||
| 15 | (% class="row" %) | ||
| 16 | ((( | ||
| 17 | **Licensing tutorial:** | ||
| 18 | |||
| 19 | //Note: Please use Chrome or Firefox to download the License from [[https:~~/~~/portal.chiefintegrations.com>>https://portal.chiefintegrations.com]]. Edge and Internet Explorer do not work properly.// | ||
| 20 | |||
| 21 | [[https:~~/~~/www.youtube.com/watch?v=H8CLZ7bp0eI>>url:https://www.youtube.com/watch?v=H8CLZ7bp0eI]] | ||
| 22 | |||
| 23 | Pre-Requisites | ||
| 24 | |||
| 25 | * VC-4 must have an SSL certificate | ||
| 26 | |||
| 27 | = Program Install = | ||
| 28 | |||
| 29 | * Download //CI_ShowRunner_vx.xx.cpz// and //Redirect.zip// from the VC-4 folder on the ShowRunnerCLC™ releases site | ||
| 30 | * Connect to the VC-4 server [[https:~~/~~/(Your_VC-4_IPAddress)/VirtualControl/config/settings/>>https://(Your_VC-4_IPAddress)/VirtualControl/config/settings/]] | ||
| 31 | * Load the Program | ||
| 32 | ** Go to the //Settings// tab | ||
| 33 | ** Go to the //Program Library// section | ||
| 34 | ** Add Program button | ||
| 35 | *** Step 1 of 2 | ||
| 36 | **** Name: showrunner | ||
| 37 | **** Program File: Select ShowRunnerLoadHelper.cpz | ||
| 38 | [[image:1663089906147-492.png||height="261" width="414"]] | ||
| 39 | **** Hit //Next >// | ||
| 40 | *** Step 2 of 2 | ||
| 41 | **** Configuration Pages: Select Redirect.zip | ||
| 42 | [[image:1663090552845-124.png||height="326" width="404"]] | ||
| 43 | * Navigate to the "Device Info" section under the "Status Tab" | ||
| 44 | ** Record the serial number and MAC address | ||
| 45 | * Create a new room and load the ShowRunner™ License as the User File for the room | ||
| 46 | ** ShowRunner™ license requires the Room ID and Room Name, as well as the MAC address | ||
| 47 | |||
| 48 | = Accessing the ShowRunner™ Console = | ||
| 49 | |||
| 50 | To access the ShowRunner™ console, connect to the VC-4 with PuTTY or another text console, log in to Linux, and then run the command ##telnet 127.0.0.1 50001## | ||
| 51 | |||
| 52 | This command will open a telnet session with the ShowRunner™ program running on the VC-4, enabling the use of typical "sr" commands. To leave the ShowRunner™ console, press the escape character as indicated when the telnet session first starts (by default it is '^]', which corresponds to ctrl+]) | ||
| 53 | |||
| 54 | = Accessing the ShowRunnerHUB™ Web UI = | ||
| 55 | |||
| 56 | The ShowRunner™ configuration should be uploaded to the processor using the ShowRunnerHUB™ web UI. It is not possible to access the ShowRunnerHUB™ web UI by directly navigating to the IP address of the VC-4 server, instead it is necessary to navigate to the following URL: https:~/~/**vc-4ip**/VirtualControl/Rooms/**ROOMID**/cws/showrunner/app/ (Bold portions should be modified with your specific IP and Room ID, **DO NOT OMIT THE LAST "/"**) | ||
| 57 | |||
| 58 | VC-4 Currently does NOT serve the XPANEL: | ||
| 59 | The XPanel does not launch from the ShowRunnerHUB webpage. To access the XPanel, extract the VTZ file from the ShowRunnerCLC™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, enter the Room ID, and Open. Type in the username and password (if applicable) and wait for the XPanel to connect. | ||
| 60 | ))) |