Changes for page VC-4 Setup

Last modified by Alexander Mott on 2024/10/24 15:00
From version 15.1
edited by Alexander Mott
on 2023/05/15 21:03
Change comment: There is no comment for this version
To version 18.1
edited by Alexander Mott
on 2023/05/15 21:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -44,6 +44,7 @@
44 44  ** Record the serial number and MAC address
45 45  * Create a new room and load the ShowRunner™ License as the User File for the room
46 46  ** ShowRunner™ license requires the Room ID and Room Name, as well as the MAC address
47 +** Room ID is always one word, all caps and is case-sensitive for the license
47 47  
48 48  = Accessing the ShowRunner™ Console =
49 49  
... ... @@ -55,6 +55,10 @@
55 55  
56 56  The ShowRunner™ configuration should be uploaded to the processor using the ShowRunnerHUB™ web UI. It is not possible to access the ShowRunnerHUB™ web UI by directly navigating to the IP address of the VC-4 server, instead it is necessary to navigate to the following URL: https:~/~/**vc-4ip**/VirtualControl/Rooms/**ROOMID**/cws/showrunner/app/ (Bold portions should be modified with your specific IP and Room ID, **DO NOT OMIT THE LAST "/"**)
57 57  
59 +Prior to logging in to the ShowRunnerHUB™ UI, it is necessary to create a ShowRunner™ user. Open the ShowRunner™ console as described above and run the following command, replacing the "username", "name" and "password" with your desired credentials: ##sradmin add user **username** "**name**" Administrators **password**##
60 +
61 +The username and password should be one word each and will be the credentials used to log in to the ShowRunnerHUB™ UI. The name can be multiple words as long as it is in quotes, and is simply a friendly name used to identify each user.
62 +
58 58  VC-4 Currently does NOT serve the XPANEL:
59 59  The XPanel does not launch from the ShowRunnerHUB webpage. To access the XPanel, extract the VTZ file from the ShowRunnerCLC™ puf file and launch. Select Options>Host Settings and input the Host IP, IPID, Port 41794, check SSL, enter the Room ID, and Open. Type in the username and password (if applicable) and wait for the XPanel to connect.
60 60  )))