Changes for page VC-4 Setup

Last modified by Alexander Mott on 2024/12/02 19:02
From version 11.1
edited by Alexander Mott
on 2023/04/26 22:09
Change comment: There is no comment for this version
To version 12.1
edited by Alexander Mott
on 2023/05/15 20:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -41,9 +41,17 @@
41 41  **** Configuration Pages: Select Redirect.zip
42 42  [[image:1663090552845-124.png||height="326" width="404"]]
43 43  * Navigate to the "Device Info" section under the "Status Tab"
44 -** Record the serial number
45 -* Create a new room.  You'll need the ROOM ID and Room Name for the showrunner license. Load the license as the User File for the room.
44 +** Record the serial number and MAC address
45 +* Create a new room and load the ShowRunner™ License as the User File for the room
46 +** ShowRunner™ license requires the Room ID and Room Name, as well as the MAC address
46 46  
48 +(% class="wikigeneratedid" %)
49 += Accessing the ShowRunner™ Console =
50 +
51 +To access the ShowRunner™ console, connect to the VC-4 with PuTTY or another text console, log in to Linux, and then run the command ##telnet 127.0.0.1 50001##
52 +
53 +This command will open a telnet session with the ShowRunner™ program running on the VC-4, enabling the use of typical "sr" commands. To leave the ShowRunner™ console, press the escape character as indicated when the telnet session first starts (by default it is '^]', which corresponds to ctrl+])
54 +
47 47  = Accessing the ShowRunnerHUB™ Web UI =
48 48  
49 49  Instead, you must add "/cws/showrunner/app/" after the IP address in order to access the Web UI (e.g. https:~/~/vc-4ip/VirtualControl/Rooms/ROOMID/cws/showrunner/app/) **DO NOT OMIT THE LAST "/"**