Wiki source code of TSW Touchpanel Setup
Version 2.1 by Alexander Mott on 2022/06/10 16:04
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="wikigeneratedid" %) | ||
| 2 | === TSW Touchscreens === | ||
| 3 | |||
| 4 | T | ||
| 5 | |||
| 6 | (% class="wikigeneratedid" %) | ||
| 7 | === === | ||
| 8 | |||
| 9 | === TSW Setup (Per Panel) === | ||
| 10 | |||
| 11 | * Set the TS/TSWs IP Address per your network requirements (If using a panel other than TSW-770 you will need the CI_ShowRunner-UI_v3.xx PUF) | ||
| 12 | * Connect the PUF (CI_ShowRunner_v3.xx) to the TSW to load the UI | ||
| 13 | ** Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770. | ||
| 14 | * When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS]) | ||
| 15 | ** You can also edit the IP table from Toolbox or the touchpanel’s setup screen. IP-IDs 10 and 11 are reserved for TSWs by default. If you have more than 2 touchpanels the additional IP-IDs will be provided. |