Skip to Content

Changes for page TSW Touchpanel Setup

Last modified by Alexander Mott on 2025/03/14 16:19
From version 3.1
edited by Alexander Mott
on 2022/06/13 15:14
Change comment: There is no comment for this version
To version 4.1
edited by Alexander Mott
on 2022/06/13 15:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,13 +16,14 @@
16 16  If operating on a network with a DHCP server (either by running DHCP server software on your computer, or if the processor has a control subnet or is running the [[SHOWRUNNER™ DHCP Server>>doc:SHOWRUNNER™ User Guide & Wiki.Troubleshooting.DHCP Server.WebHome]]), then it is possible to configure these settings via Ethernet using Text Console:
17 17  
18 18  *
19 -* Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a 10.0.0.0/24 subnet, with a TSW IP address of 10.0.0.19, a TSW IP-ID of 10, and a processor IP address of 10.0.0.10)
20 -** Disable DHCP: dhcp 0 off
21 -** Set IP address: ipa 0 10.0.0.10
22 -** Set IP subnet mask: ipm 0 255.255.255.0
23 -** Set default gateway: defr 0 10.0.0.1
24 -** Set hostname: host AP3-CPP
25 -** Reboot the processor: reboot
19 +* Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a **10.0.0.0**(% style="color:darkgoldenrod" %)**/24**(%%) subnet, with a TSW IP address of (% style="color:blue" %)**10.0.0.19**(%%), a TSW IP-ID of (% style="color:olive" %)**10**(%%), and a processor IP address of (% style="color:orange" %)**10.0.0.10**(%%))
20 +** Disable DHCP: ##dhcp 0 off##
21 +** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.19**(%%)##
22 +** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
23 +** Set default gateway: ##defr 0 **10.0.0.1**##
24 +** Update IP table: ##addm (% style="color:olive" %)**10**(%%) (% style="color:orange" %)**10.0.0.10**(%%)##
25 +** Set hostname: ##host **TSW-L1**##
26 +** Reboot the TSW: ##reboot##
26 26  
27 27  === Load the SHOWRUNNER™ Project ===
28 28