Skip to Content

Changes for page TSW Touchpanel Setup

Last modified by Austin Weygandt on 2025/05/13 19:42
From version 29.1
edited by Alexander Mott
on 2024/02/09 01:00
Change comment: There is no comment for this version
To version 28.1
edited by Alexander Mott
on 2024/02/09 00:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -36,7 +36,7 @@
36 36  * At this point, it is a good idea to [[update the device firmware>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Updating Firmware.WebHome]]
37 37  * Repeat these steps for all TSWs on the job
38 38  
39 -If you are able to identify TSWs by their MAC address, then it is possible to configure these settings via Ethernet using Text Console:
39 +If operating on a network with a temporary DHCP server (either by running DHCP server software on your computer, or if the processor has a control subnet or is running the [[ShowRunnerCLC™ DHCP Server>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.DHCP Server.WebHome]]) and you are able to identify TSWs by their MAC address, then it is possible to configure these settings via Ethernet using Text Console:
40 40  
41 41  * On jobs with multiple TSWs, they can be identified using Device Discovery and matching the MAC address of the TSW to the IP address assigned by the DHCP server
42 42  * Once connected, open Text Console and run the following commands to configure the TSW's IP settings (example is for a TSW IP-ID of (% style="color:olive" %)**10**(%%), a target processor IP address of (% style="color:orange" %)**172.22.0.1**(%%), and a TSW hostname of (% style="color:purple" %)**TSW-L1**(%%))