Processor Setup

//Note: Please use Chrome or Firefox to download the License from [[https:~~/~~/portal.chiefintegrations.com>>https://portal.chiefintegrations.com]]. Edge and Internet Explorer do not work properly.//

23

24

[[https:~~/~~/www.youtube.com/watch?v=H8CLZ7bp0eI>>url:https://www.youtube.com/watch?v=H8CLZ7bp0eI]]

25

26

=== IP Configuration and Program Load (Per Processor) ===

27

28

* Obtain the latest build of ShowRunner [[https:~~/~~/files.chiefintegrations.com/s/WHNzXrrZbB5jC3E>>url:https://files.chiefintegrations.com/s/WHNzXrrZbB5jC3E]]

29

* Set the processor’s IP Address per your network requirements

30

* For processors with a Control Subnet (CP3N/AV3/PRO3/CP4N/AV4/PRO4/ZUM-HUB4):

31

** Connect to the processor via Text Console and type "startprogafterrouter on"

32

*** This will force the processor to wait until the router has started before attempting to load the showrunner™ program, avoiding potential license validation issues after a power loss.

33

** Networked lighting hardware should be landed on the Control Subnet

34

** The processor acts as a DHCP server on the Control Subnet, with addresses that are determined automatically based on the LAN configuration

35

** The Control Subnet can be configured manually in the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox

36

*** Set routing to "Manual" with the start address and subnet size

37

*** E.g., a setting of "10.0.0.0/24" will have the processor at 10.0.0.1 with an IP mask of 255.255.255.0 and a default gateway and DNS server at 10.0.0.2

38

*** 100.64.0.0/10 is a recommended range as it is unlikely to be used on any corporate network. Processor IP will be 100.64.0.1 and default gateway/DNS will be 100.64.0.2. Console command is: ##csrouterprefix 100.64.0.0/10##

39

* Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting hardware.

40

* Double click the PUF to install ShowRunner (works best with Toolbox closed)

41

* Select the PUF file again if needed, connect to the processor using the pencil, and select Recheck (This verifies the need to install the program, the XPanel UI, and the Crestron App UI)

42

* Click Update when prompted to install ShowRunner

43

* After loading, you can connect to the UI by navigating to the processor’s IP.

44

** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated).

45

** If stuck on "Connecting to Processor" you will need to accept the certificate.

46

* Showrunner™ will be loaded but a configuration and license are still needed. Please proceed with the next section.

47

48

=== License and Configuration Deployment ===

49

50

* Download the configuration file from the link provided by Chief Integrations

51

* Obtain and download the license from [[https:~~/~~/portal.chiefintegrations.com>>url:https://portal.chiefintegrations.com]]

52

** Processors with a Control Subnet should use the LAN MAC address, **not** the Control Subnet MAC address

53

* Navigate to the showrunner™ management page

54

* Login to the showrunnerHUB™

55

** 4-Series processor: The login created by the processor will work

56

** 3-Series processor: Using Toolbox Text Console - type "sradmin [username] [name] administrators [password]" (not needed if processor authentication is setup)

57

* Click Setup then File Management

58

** [[image:MicrosoftTeams-image7c355557d0a3ae410e72498ee667de2df50226f3e3940c2df4b51bb7137e176b.png||height="240" width="250"]]

59

** Under “Upload New License File”

60

*** Leave restart unchecked after transfer

61

*** Select “Choose File” find the license file you downloaded from the portal

62

*** Select “Upload”

63

** Loading Configuration

64

*** From Configuration File

65

**** Under “Upload New Config File”

66

***** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.

67

***** Select “Upload”

68

***** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console

69

***** The program will restart

70

*** From Backup

71

**** Select "Restore"

72

**** Select "Choose Backup" and find the "SRBackup.zip" of the backup you wish to restore

73

**** Enter the secret used to create the backup. Showrunner will upload the file and verify the secret.

74

**** Select "Restart" to load the new configuration