Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 9.1
edited by Alexander Mott
on 2022/06/09 22:33
Change comment: There is no comment for this version
To version 11.1
edited by Alexander Mott
on 2022/06/09 22:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -39,6 +39,7 @@
39 39  *** Set IP subnet mask: ##ipm 0 255.255.255.0##
40 40  *** Set default gateway: ##defr 0 10.0.0.1##
41 41  *** Set hostname: ##host AP3-CPP##
42 +*** Reboot the processor: ##reboot##
42 42  ** It is also possible to configure a processor over Ethernet by using a DHCP server software on your laptop to assign an IP address
43 43  *** Configure your DHCP server software to assign IP addresses in the desired range
44 44  *** Once the processor is assigned an IP address, connect to it via Text Console at the assigned IP address
... ... @@ -61,6 +61,7 @@
61 61  
62 62  * Download the latest build of SHOWRUNNER™ [[https:~~/~~/files.chiefintegrations.com/s/WHNzXrrZbB5jC3E>>url:https://files.chiefintegrations.com/s/WHNzXrrZbB5jC3E]]
63 63  * Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting network and do not conflict with any devices already on the network.
65 +** While it is possible to load the program via USB, it is not recommended because the transfer speed is significantly slower than loading via Ethernet
64 64  * Double click the PUF to open the Package Update Tool and install SHOWRUNNER™ (works best with Toolbox closed)
65 65  ** The Package Update Tool will automatically open your Address Book and prompt you to select a device
66 66  *** If you have not created an Address Book for this job, close the Address Book window and press the pencil icon