Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 29.1
edited by Alexander Mott
on 2022/09/16 20:47
Change comment: There is no comment for this version
To version 36.1
edited by Alexander Mott
on 2022/10/04 22:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,20 +2,22 @@
2 2  (((
3 3  This page is for typical processor setup; for ZUM-HUB4 deployments, see our [[dedicated ZUM-HUB4 page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUM-HUB4 Processor Setup.WebHome]].
4 4  )))
5 +
5 5  (% class="box warningmessage" %)
6 6  (((
7 -SHOWRUNNER™ is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
8 -3-Series: PUF 1.8001.0146
9 -4-Series: PUF 2.7000.00052.01
10 -VC-4: 2.7000.00047
8 +SHOWRUNNER™ is tested against current Crestron firmware releases. **Please use at least the recommended firmware builds.**
9 +
10 +* 3-Series: PUF 1.8001.0146
11 +* 4-Series: PUF 2.7000.00052.01
12 +* VC-4: 2.7000.00047
13 +
14 +**Notes:**
15 +
16 +* Static IP or properly setup DHCP/DNS implementation required.
17 +* Auto-Assigned/Link-Local IP address range of 169.254.x.x not supported (Crestron xPanel issue)
11 11  )))
12 -(% class="box infomessage" id="HNotes" %)
13 -(((
14 -Notes
15 -Static IP or properly setup DHCP/DNS implementation required.
16 -Auto-Assigned/Link-Local IP address range of 169.254.x.x not supported (Crestron xPanel issue)
17 -)))
18 -{{box title="**Contents**"}}
19 +
20 +{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
19 19  {{toc/}}
20 20  {{/box}}
21 21  
... ... @@ -96,7 +96,7 @@
96 96  *** Click the "Send" button and click "Yes" to upload the program
97 97  *** Once it is done loading, you should be able to run the ##sr ver## command and see the currently installed version of SHOWRUNNER™
98 98  * Once SHOWRUNNER™ is loaded, you can connect to the UI by navigating to the processor’s IP. A license and configuration file are still required.  
99 -** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated)
101 +** **3-Series processors require authentication enabled** ("##ssl self##" command followed by a reboot can be used but steps will need to be repeated)
100 100  ** If stuck on "Connecting to Processor" you will need to accept the certificate
101 101  * For jobs with multiple processors, SHOWRUNNER™ will need to be loaded to each processor
102 102