Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 28.1
edited by Alexander Mott
on 2022/09/16 20:46
Change comment: There is no comment for this version
To version 36.1
edited by Alexander Mott
on 2022/10/04 22:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,20 +5,19 @@
5 5  
6 6  (% class="box warningmessage" %)
7 7  (((
8 -SHOWRUNNER™ is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
9 -3-Series: PUF 1.8001.0146
10 -4-Series: PUF 2.7000.00052.01
11 -VC-4: 2.7000.00047
12 -)))
8 +SHOWRUNNER™ is tested against current Crestron firmware releases. **Please use at least the recommended firmware builds.**
13 13  
14 -(% class="box infomessage" id="HNotes" %)
15 -(((
16 -Notes
17 -Static IP or properly setup DHCP/DNS implementation required.
18 -Auto-Assigned/Link-Local IP address range of 169.254.x.x not supported (Crestron xPanel issue)
10 +* 3-Series: PUF 1.8001.0146
11 +* 4-Series: PUF 2.7000.00052.01
12 +* VC-4: 2.7000.00047
13 +
14 +**Notes:**
15 +
16 +* Static IP or properly setup DHCP/DNS implementation required.
17 +* Auto-Assigned/Link-Local IP address range of 169.254.x.x not supported (Crestron xPanel issue)
19 19  )))
20 20  
21 -{{box title="**Contents**"}}
20 +{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
22 22  {{toc/}}
23 23  {{/box}}
24 24  
... ... @@ -99,7 +99,7 @@
99 99  *** Click the "Send" button and click "Yes" to upload the program
100 100  *** Once it is done loading, you should be able to run the ##sr ver## command and see the currently installed version of SHOWRUNNER™
101 101  * Once SHOWRUNNER™ is loaded, you can connect to the UI by navigating to the processor’s IP. A license and configuration file are still required.  
102 -** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated)
101 +** **3-Series processors require authentication enabled** ("##ssl self##" command followed by a reboot can be used but steps will need to be repeated)
103 103  ** If stuck on "Connecting to Processor" you will need to accept the certificate
104 104  * For jobs with multiple processors, SHOWRUNNER™ will need to be loaded to each processor
105 105