Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 23.1
edited by Alexander Mott
on 2022/06/30 16:52
Change comment: There is no comment for this version
To version 21.1
edited by Alexander Mott
on 2022/06/30 15:27
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +6,3 @@
1 -(% class="box errormessage" %)
2 -(((
3 -This page is for ordinary processor setup. For ZUM-HUB4 deployments, see our [[dedicated ZUM-HUB4 page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUM-HUB4 Processor Setup.WebHome]].
4 -)))
5 -
6 6  (% class="box warningmessage" %)
7 7  (((
8 8  SHOWRUNNER™ is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
... ... @@ -81,12 +81,11 @@
81 81  ** Run the command ##sr ver##
82 82  ** If the console returns with the newly installed version of SHOWRUNNER™, then the installation was successful
83 83  ** If the console returns with "Bad or Incomplete Command (sr)" then the installation was not successful
84 -*** Rename the downloaded .puf file to be a .zip file and open the archive
79 +*** Rename the .puf file to be a .zip file and open the archive
85 85  **** Some file archivers (such as 7-Zip) allow you to right click on the PUF file and open the archive without changing the filetype
86 86  *** Extract the "CI.Lighting.ShowRunner.cpz" file
87 87  *** In Toolbox, connect to the processor via Text Console and click the lightning bolt icon and select "SIMPL Program..."
88 -**** Alternatively, navigate to Functions>SIMPL Program...>SIMPL Program (Program01)...
89 -*** Under the "Send Program" section, browse your PC and select the extracted .cpz file
83 +*** Under the "Send" section, browse your PC and select the extracted .cpz file
90 90  *** Click the "Send" button and click "Yes" to upload the program
91 91  *** Once it is done loading, you should be able to run the ##sr ver## command and see the currently installed version of SHOWRUNNER™
92 92  * Once SHOWRUNNER™ is loaded, you can connect to the UI by navigating to the processor’s IP. A license and configuration file are still required.