Changes for page Processor Setup

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Parent

...	...	@@ -1,1 +1,1 @@
1		-SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.WebHome
	1	+SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.WebHome

Content

...	...	@@ -1,11 +6,6 @@
1		-(% class="box errormessage" %)
2		-(((
3		-This page is for ordinary processor setup. For ZUM-HUB4 deployments, see our [[dedicated ZUM-HUB4 page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUM-HUB4 Processor Setup.WebHome]].
4		-)))
5		-
6	6	(% class="box warningmessage" %)
7	7	(((
8		-SHOWRUNNER™ is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
	3	+showrunner is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
9	9	3-Series: PUF 1.8001.0146
10	10	4-Series: PUF 2.7000.00052.01
11	11	VC-4: 2.7000.00047
...	...	@@ -38,7 +38,7 @@
38	38	**** Once logged into Text Console, run the following commands, replacing the "username" and "password" with your desired credentials
39	39	***** ##adduser -N:username -P:password##
40	40	***** ##addusertogroup -N:username -G:Administrators##
41		-** Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a processor IP address of (% style="color:blue" %)**10.0.0.10**(%%))
	36	+** Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a 10.0.0.0(% style="color:darkgoldenrod" %)**/24**(%%) subnet, with a processor IP address of (% style="color:blue" %)**10.0.0.10*(%%))
42	42	*** Disable DHCP: ##dhcp 0 off##
43	43	*** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.10**(%%)##
44	44	*** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
...	...	@@ -57,7 +57,7 @@
57	57	** The Control Subnet can be configured manually in the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox
58	58	*** Set routing to "Manual" with the start address and subnet size
59	59	*** E.g., a setting of "10.0.0.0/24" will have the processor at 10.0.0.1 with an IP mask of 255.255.255.0 and a default gateway and DNS server at 10.0.0.2
60		-** The Control Subnet can also be configured to e.g. **10.0.0.0/24** using Text Console command: ##csrouterprefix **10.0.0.0/24**##
	55	+** The Control Subnet can also be configured using Text Console command: ##csrouterprefix **10.0.0.0/24**##
61	61	* If the job has multiple processors, then these steps must be repeated for all processors on the job
62	62	** For jobs with Central Control, the IP addresses of the processors matters
63	63	** Chief Integrations will provide an SRTakeoff.xlsx spreadsheet with an IP Table tab that lists the IP address for each processor. If these IP addresses must be changed during startup, then it will be necessary to also change the IP addresses in the Remote System Definition in the configuration file
...	...	@@ -65,8 +65,8 @@
65	65
66	66	=== Program Load ===
67	67
68		-* Download the latest build of SHOWRUNNER™ from the[[ Chief Integrations Portal>>https://files.chiefintegrations.com/index.php/s/WHNzXrrZbB5jC3E]]
69		-* Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting network and do not conflict with any devices already on the network
	63	+* Download the latest build of SHOWRUNNER™ [[https:~~/~~/files.chiefintegrations.com/s/WHNzXrrZbB5jC3E>>url:https://files.chiefintegrations.com/s/WHNzXrrZbB5jC3E]]
	64	+* Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting network and do not conflict with any devices already on the network.
70	70	** While it is possible to load the program via USB, it is not recommended because the transfer speed is significantly slower than loading via Ethernet
71	71	* Double click the PUF to open the Package Update Tool and install SHOWRUNNER™ (works best with Toolbox closed)
72	72	** The Package Update Tool will automatically open your Address Book and prompt you to select a device
...	...	@@ -89,9 +89,9 @@
89	89	*** Click the "Send" button and click "Yes" to upload the program
90	90	*** Once it is done loading, you should be able to run the ##sr ver## command and see the currently installed version of SHOWRUNNER™
91	91	* Once SHOWRUNNER™ is loaded, you can connect to the UI by navigating to the processor’s IP. A license and configuration file are still required.
92		-** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated)
93		-** If stuck on "Connecting to Processor" you will need to accept the certificate
94		-* For jobs with multiple processors, SHOWRUNNER™ will need to be loaded to each processor
	87	+** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated).
	88	+** If stuck on "Connecting to Processor" you will need to accept the certificate.
	89	+* For jobs with multiple processors, SHOWRUNNER™ will need to be loaded to each processor.
95	95
96	96	=== License and Configuration Deployment ===
97	97
...	...	@@ -116,7 +116,7 @@
116	116	***** ##sradmin username "name" administrators password##
117	117	***** The username and password should be one word each and are the credentials used to log in to the showrunnerHUB™
118	118	***** The name can be multiple words as long as it is in quotes, and is simply a friendly name used to identify each user.
119		-*** Once logged in to the showrunnerHUB™ UI, you should be automatically redirected to the File Management page
	114	+*** Once logged in to the showrunnerHUB™ UI, you should be automatically redirected to the File Management page.
120	120	**** If you are not automatically redirected, then you can navigate to this page by clicking "Setup" in the top right and then selecting "File Management" from the list on the left
121	121	**** [[image:1654807593390-193.png]]
122	122	**** Under “Upload New License File”
...	...	@@ -136,26 +136,3 @@
136	136	**** Wait for the processor to finish restarting and then reload the page.
137	137	***** 3-Series processors will take 45 to 90 restart
138	138	***** 4-Series processors should restart considerably faster
139		-
140		-=== Set System Time ===
141		-
142		-It is important for the device clock to be accurate in order for scheduled events to trigger at the appropriate time. If Toolbox is still open, this can be done easily:
143		-
144		-* Connect to the processor via Text Console
145		-* At the top of the Toolbox window, navigate to Functions>System Clock...
146		-* If your computer is in the correct timezone, click Synchronize Device Time with PC
147		-** The Timezone and Device Time should synchronize automatically
148		-** If your PC is in the incorrect Timezone or the time did not synchronize properly, then manually adjust the Time, Date, and Timezone
149		-* Press the Apply button
150		-
151		-Note that the Location given in the System Clock... menu of Toolbox is not used by SHOWRUNNER™. Instead, the location used for sunrise/sunset calculations is stored in the configuration and will typically be set by Chief Integrations prior to delivery of the configuration. Both the location and time can be viewed and edited using the SHOWRUNNER™ UI
152		-
153		-* SHOWRUNNER™ XPanel UI:
154		-** Navigate to Settings>Location and System Clock
155		-** Press the Lock icon to enable editing
156		-** Adjust the time, timezone, and location as necessary
157		-** Press Set System Clock to save the changes
158		-* showrunnerHUB™ Web UI:
159		-** Navigate to Setup>System Settings>Location and System Clock
160		-** Adjust the time, timezone, and location as necessary
161		-** Click Apply to save the changes