Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 2.1
edited by Alexander Mott
on 2022/06/09 17:17
Change comment: There is no comment for this version
To version 3.1
edited by Alexander Mott
on 2022/06/09 17:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -73,20 +73,5 @@
73 73  **** Enter the secret used to create the backup.  Showrunner will upload the file and verify the secret.
74 74  **** Select "Restart" to load the new configuration
75 75  ** Wait about 45 seconds after loading the configuration for the program to restart completely(((
76 -=== TSW Setup (Per Panel) ===
77 77  
78 -* Set the TS/TSWs IP Address per your network requirements (If using a panel other than TSW-770 you will need the CI_ShowRunner-UI_v3.xx PUF)
79 -* Connect the PUF (CI_ShowRunner_v3.xx) to the TSW to load the UI
80 -** Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770.  
81 -* When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
82 -** You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.
83 -
84 -=== GLPAC Setup ===
85 -
86 -* When GLPACs are deployed Chief Integrations will provide a load script that loads and configures the GLPAC hardware.  The script includes Chief Integrations chosen IP addresses unless otherwise requested.
87 -* Set the IP addresses on all GLPACs per your network requirements.  The script will need to be updated if IP Addresses are changed from Chief Integrations chosen IP Addresses.
88 -* Using Toolbox -> Script Manager, select the Scripting dropdown or right click and select “Load Script”.  Find the text file provided.
89 -* Provided the given IPs can be seen on the network, double or right clicking an entry will load the program and link the IP table, enabling control through showrunner™
90 -* Say yes to the dialog warning the hardware does not match (if prompted), and yes to overwrite the IP table (if prompted)
91 91  )))
92 -*