Skip to Content

Changes for page Processor Setup

Last modified by Alexander Mott on 2024/12/02 19:04
From version 13.1
edited by Alexander Mott
on 2022/06/13 15:12
Change comment: There is no comment for this version
To version 14.1
edited by Alexander Mott
on 2022/06/13 15:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -33,7 +33,7 @@
33 33  **** Once logged into Text Console, run the following commands, replacing the "username" and "password" with your desired credentials
34 34  ***** ##adduser -N:username -P:password##
35 35  ***** ##addusertogroup -N:username -G:Administrators##
36 -** Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a 10.0.0.0(% style="color:darkgoldenrod" %)**/24**(%%) subnet, with a processor IP address of (% style="color:blue" %)**10.0.0.10**(%%))
36 +** Once connected, open Text Console and run the following commands to configure the processor's IP settings (example is for a **10.0.0.0(% style="color:darkgoldenrod" %)/24(%%)** subnet, with a processor IP address of (% style="color:blue" %)**10.0.0.10**(%%))
37 37  *** Disable DHCP: ##dhcp 0 off##
38 38  *** Set IP address: ##ipa 0 (% style="color:blue" %)**10.0.0.10**(%%)##
39 39  *** Set IP subnet mask: ##ipm 0 (% style="color:darkgoldenrod" %)**255.255.255.0**(%%)##
... ... @@ -52,7 +52,7 @@
52 52  ** The Control Subnet can be configured manually in the "Functions>Ethernet Addressing...>Control Subnet" menu of Toolbox
53 53  *** Set routing to "Manual" with the start address and subnet size
54 54  *** E.g., a setting of "10.0.0.0/24" will have the processor at 10.0.0.1 with an IP mask of 255.255.255.0 and a default gateway and DNS server at 10.0.0.2
55 -** The Control Subnet can also be configured using Text Console command: ##csrouterprefix **10.0.0.0/24**##
55 +** The Control Subnet can also be configured to e.g. 10.0.0.0/24 using Text Console command: ##csrouterprefix **10.0.0.0/24**##
56 56  * If the job has multiple processors, then these steps must be repeated for all processors on the job
57 57  ** For jobs with Central Control, the IP addresses of the processors matters
58 58  ** Chief Integrations will provide an SRTakeoff.xlsx spreadsheet with an IP Table tab that lists the IP address for each processor. If these IP addresses must be changed during startup, then it will be necessary to also change the IP addresses in the Remote System Definition in the configuration file