Skip to Content

Changes for page Crestron RF Gateway Setup

Last modified by Alexander Mott on 2025/03/12 17:16
From version 22.1
edited by Alexander Mott
on 2024/10/24 17:19
Change comment: There is no comment for this version
To version 23.1
edited by Alexander Mott
on 2024/10/24 17:34
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -50,6 +50,8 @@
50 50  * At this point, it is a good idea to [[update the device firmware>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Updating Firmware.WebHome]]
51 51  * Repeat for all CEN-GWEXERs on the job
52 52  
53 +If setup has been done correctly and the ShowRunnerCLC™ program and configuration have already been loaded to the processor, then you should see the CEN-GWEXER's IP-ID reporting online when you run the ##ipt## command on both the CEN-IO and the processor.
54 +
53 53  == Static Configuration ==
54 54  
55 55  (% class="box warningmessage" %)
... ... @@ -72,6 +72,8 @@
72 72  * At this point, it is a good idea to [[update the device firmware>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Updating Firmware.WebHome]]
73 73  * Repeat for all CEN-GWEXERs on the job
74 74  
77 +If setup has been done correctly and the ShowRunnerCLC™ program and configuration have already been loaded to the processor, then you should see the CEN-GWEXER's IP-ID reporting online when you run the ##ipt## command on both the CEN-IO and the processor.
78 +
75 75  = RF Channel =
76 76  
77 77  Crestron wireless devices have 16 non-overlapping channels numbered 11-26 to prevent and avoid RF interference either from other appliances in the building (such as microwaves or Wi-Fi routers) or from other Crestron devices that are attempting to communicate with different CEN-GWEXERs.