Wiki source code of Pharos Configuration
Version 1.1 by Alexander Mott on 2023/05/05 17:44
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{box cssClass="floatinginfobox" title="**CONTENTS**"}} | ||
| 2 | {{toc/}} | ||
| 3 | {{/box}} | ||
| 4 | |||
| 5 | (% class="row" %) | ||
| 6 | ((( | ||
| 7 | ShowRunner™ can control DMX fixtures through several different methods, including Pharos DMX controllers. The most common Pharos controllers sold through Crestron are the Pharos LPC-1 (DIN-DMX-1UNIVERSE) and the Pharos LPC-2 (DIN-DMX-2UNIVERSE). These LPC controllers appear physically identical, but the LPC-1 shares a single universe across both DMX outputs while the LPC-2 has a separate universe for each output. ShowRunner™ uses the Pharos Controller API to send commands over Ethernet to the Pharos Controller, which then sends DMX commands to the fixtures. | ||
| 8 | |||
| 9 | = Pharos Project = | ||
| 10 | |||
| 11 | Pharos projects are created using the free Pharos Designer 2 software from Pharos Controls. When creating a project for use with ShowRunner™, ensure that API version 5.0 is selected for the project. ShowRunner™ sends group-level commands over the Pharos Controller API, so each Fixture Group in Pharos will correspond to | ||
| 12 | |||
| 13 | 1. Download the Pharos Designer 2 software from Ph | ||
| 14 | |||
| 15 | |||
| 16 | The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™ | ||
| 17 | |||
| 18 | |||
| 19 | Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. | ||
| 20 | |||
| 21 | = Device Configuration = | ||
| 22 | |||
| 23 | = ShowRunner™ Configuration = | ||
| 24 | |||
| 25 | |||
| 26 | |||
| 27 | ))) |