Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 33.1
edited by Alexander Mott
on 2023/05/16 21:18
Change comment: There is no comment for this version
To version 34.1
edited by Alexander Mott
on 2023/10/18 16:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -150,6 +150,8 @@
150 150  
151 151  In order to control DMX fixtures on a Pharos controller with ShowRunner™, it is necessary to make sure that the ShowRunner™ configuration has the correct settings for the Pharos controller. Under the "LightingControllers" section of the ShowRunner™ configuration, locate the entry for the Pharos controller. Under the "Properties" section, verify that the "IpAddressOrHostname" matches the IP address or hostname of the Pharos controller. The "ApiPort" only needs to be changed if the HTTP port for the Pharos controller's web server has been changed from the default 80. Once the Properties for all Pharos controllers have been updated, load the configuration to the processor.
152 152  
153 +== Define Pharos Loads in ShowRunner™ ==
154 +
153 153  Control Pharos groups with ShowRunner™, it is necessary to define them as loads in the ShowRunner™ configuration. To do this using the XPanel UI, navigate to the Settings > Load Configuration page and then select the Pharos controller from the list of controllers on the left. Once the controller is selected, press the "Configure Loads" button:
154 154  
155 155  * Currently defined loads are shown in the list on the left
... ... @@ -174,8 +174,10 @@
174 174  ** If controlling the RGB and White channels of an RGBW fixture separately, then you must define an RGB type load associated with the RGB fixture group in Pharos and then a Single Channel type load associated with the White fixture group in Pharos
175 175  ** The Area Assignment dictates what area the load will be associated with
176 176  
177 -ShowRunner™ is also capable of triggering Timelines in the Pharos project. This can be configured using the XPanel UI:
179 +== Scene Mapping (Trigger Pharos Timelines) ==
178 178  
181 +ShowRunner™ is also capable of triggering Timelines in the Pharos project by mapping Pharos Timelines to ShowRunner™ Scenes. This can be configured using the XPanel UI:
182 +
179 179  1. Navigate to Settings > Load Hardware
180 180  1. Select the Pharos controller from the list of load controllers on the left
181 181  1. Press "Configure Scene Tracking"