Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10

From version 28.2

edited by Alexander Mott
on 2023/05/16 20:25

Change comment: (Autosaved)

To version 29.1

edited by Alexander Mott
on 2023/05/16 20:32

Change comment: There is no comment for this version

Summary

Page properties

Content

@@ -228,7 +228,10 @@
 . Press the "Discover" button that corresponds to the output that you want to address fixtures for
 *. Single-universe LPCs have separate "Discover" buttons corresponding to each of the two DMX outputs
 *. Multi-universe LPCs and EDNs typically have a single "Discover" button for each universe, as there is a 1-to-1 relationship between the output and the universe
--1. A window will appear and list all discovered fixtures, along with a unique device ID, manufacturer/model information, personality (control mode)
++1. A window will appear and list all discovered fixtures, along with a unique device ID, manufacturer/model information, personality (control mode), footprint (number of required addresses), and their current start address
++1*. Due to manufacturer compatibility issues, some RDM-capable fixtures may not appear online, and available information (such as personality) may be incomplete for those fixtures that are online
++1*. In cases where RDM capable fixtures do not appear online, they must be addressed manually as described on our [[DMX Fixture Addressing page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.DMX Fixture Addressing.WebHome||anchor="HAddressingDrivers"]]
++1.
  == Address Verification ==