Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 15.1
edited by Alexander Mott
on 2023/05/16 17:33
Change comment: Uploaded new attachment "network-project-usb_text_crop.png", version {1}
To version 16.1
edited by Alexander Mott
on 2023/05/16 17:33
Change comment: Uploaded new attachment "network-project-assign_text_crop.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -4,6 +4,8 @@
4 4  
5 5  ShowRunner™ can control DMX fixtures through several different methods, including Pharos DMX controllers. The most common Pharos controllers sold through Crestron are the Pharos LPC-1 (DIN-DMX-1UNIVERSE) and the Pharos LPC-2 (DIN-DMX-2UNIVERSE). These LPC controllers appear physically identical, but the LPC-1 shares a single universe across both DMX outputs while the LPC-2 has a separate universe for each output. ShowRunner™ uses the Pharos Controller API to send commands over Ethernet to the Pharos Controller, which then sends DMX commands to the fixtures.
6 6  
7 +This article covers the basics of Pharos Designer 2 for the purposes of integrating with ShowRunnerCLC™ installations. Further information can be found from the official[[ Pharos Designer 2 documentation>>https://dl.pharoscontrols.com/software_help/designer2/Default.htm]].
8 +
7 7  = Pharos Projects =
8 8  
9 9  ShowRunner™ integrates with Pharos LPC DMX controllers using the Pharos API. The ShowRunner™ configuration and the Pharos project loaded to the Pharos LPC need to be in coordination with each other in order for ShowRunner™ to control the DMX loads as expected. It is therefore sometimes necessary to either create or edit a Pharos project in order to determine how the DMX loads need to be defined in the ShowRunner™ configuration.
network-project-assign_text_crop.png
Size
... ... @@ -1,1 +1,1 @@
1 -82.6 KB
1 +105.6 KB
Content