Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.7
edited by Alexander Mott
on 2023/05/05 18:14
Change comment: (Autosaved)
To version 1.2
edited by Alexander Mott
on 2023/05/05 17:49
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -15,28 +15,14 @@
15 15  1. Open the Pharos Designer 2 software
16 16  1. In the top-right, click "New Project" and select the type of Pharos controller that will be the primary controller
17 17  1*. Crestron SKUs DIN-DMX-1UNIVERSE and DIN-DMX-2UNIVERSE both correspond to "LPC" in Pharos
18 -1. Navigate to the "Project" page by clicking the Pharos logo on the left
19 -1. Under the "Controller API" heading, verify that API Version 5.0 is selected
20 -1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
21 -1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
22 -1. Locate your fixture in the Fixture Profile List on the right side of the Layout page
23 -1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, etc. profiles
24 -1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
25 -1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
26 -1*.
27 -1. Add fixtures to the layout by dragging them from the fixture profile list
28 -1*. Every fixture that is added to the layout represents a unique set of DMX addresses
29 -1*. Note that the fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
30 -1*. Right-clicking a fixture on the layout will allow you to "Duplicate" or create a "New Instance" of a fixture
31 -1**. Duplicating a fixture creates a new fixture with the same profile and properties
32 -1**. Creating a New Instance will create another
33 -1. If desired
18 +1. Navigate to the "Project" page and verify that the API Version
34 34  
35 35  
36 36  The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
37 37  
38 -Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
39 39  
24 +Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™.
25 +
40 40  = Device Configuration =
41 41  
42 42  = ShowRunner™ Configuration =