Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.7
edited by Alexander Mott
on 2023/05/05 18:14
Change comment: (Autosaved)
To version 1.15
edited by Alexander Mott
on 2023/05/05 18:54
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -10,6 +10,29 @@
10 10  
11 11  Pharos projects are created using the free Pharos Designer 2 software from Pharos Controls. When creating a project for use with ShowRunner™, ensure that API version 5.0 is selected for the project. Individual loads control from ShowRunner™ is achieved with group-level commands using the Pharos Controller API, so each Fixture Group defined in the Pharos Project should correspond to a single load in ShowRunner™. In addition to group-level commands, ShowRunner™ also supports mapping ShowRunner™ Scenes to Pharos Timelines.
12 12  
13 +When creating a Pharos project for a ShowRunner™ installation, there are several things to consider:
14 +
15 +* Individual loads in ShowRunner™ send group-level commands to Fixture Groups in Pharos
16 +* Scene recalls in ShowRunner™ can be made to trigger Timelines in Pharos
17 +* The Pharos API limits group-level commands to intensity, intensity/RGB, and intensity/CCT
18 +** (((
19 +(% class="table-condensed" %)
20 +|(% style="width:244px" %)ShowRunner™ Load Type|(% style="width:244px" %)Pharos API Command
21 +|(% style="width:244px" %)Single-Channel|(% style="width:244px" %)Intensity
22 +|(% style="width:244px" %)RGB|(% style="width:244px" %)Intensity/RGB
23 +|(% style="width:244px" %)Dynamic White|(% style="width:244px" %)Intensity/CCT
24 +)))
25 +* The Pharos controller does any necessary processing to adapt these commands for the fixtures
26 +** For example,
27 +
28 +*
29 +
30 +* ShowRunner™ uses group-level commands, so each individual load in ShowRunner™ must have a corresponding Fixture Group in Pharos
31 +* Fixture Groups defined as single-channel loads in ShowRunner™
32 +* For RGBW fixtures, it may be a good idea to define them as separate RGB and W fixtures so that ShowRunner™ is able to control the white channel separately from the RGB channels
33 +* Fixtures can belong to multiple Fixture Groups, allowing ShowRunner™ to send different types (e.g. RGB vs CCT) of command to the same fixture 
34 +** Useful for certain situations, such as HSIC fixtures that need to be controlled as color-changing (RGB) in some situations but dynamic white (intensity/CCT) in others
35 +
13 13  The basic steps for creating a Pharos Project for use with ShowRunner™ are:
14 14  
15 15  1. Open the Pharos Designer 2 software
... ... @@ -17,24 +17,25 @@
17 17  1*. Crestron SKUs DIN-DMX-1UNIVERSE and DIN-DMX-2UNIVERSE both correspond to "LPC" in Pharos
18 18  1. Navigate to the "Project" page by clicking the Pharos logo on the left
19 19  1. Under the "Controller API" heading, verify that API Version 5.0 is selected
43 +1. Navigate to the "Network" page by clicking the network icon on the left
44 +1. Select "Controller 1" and verify that the number of universes in the "Properties" menu matches the controller that was ordered for the job
45 +1. If required, click the "New Controller..." button to add additional Pharos controllers
20 20  1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
21 21  1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
22 -1. Locate your fixture in the Fixture Profile List on the right side of the Layout page
23 -1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, etc. profiles
48 +1. Locate the desired fixture in the Fixture Profile List on the right side of the Layout page
49 +1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, HSIC, etc. profiles
24 24  1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
25 25  1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
26 -1*.
27 27  1. Add fixtures to the layout by dragging them from the fixture profile list
28 28  1*. Every fixture that is added to the layout represents a unique set of DMX addresses
29 -1*. Note that the fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
30 -1*. Right-clicking a fixture on the layout will allow you to "Duplicate" or create a "New Instance" of a fixture
31 -1**. Duplicating a fixture creates a new fixture with the same profile and properties
32 -1**. Creating a New Instance will create another
33 -1. If desired
54 +1*. The fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
55 +1*. Fixture properties such as name, shape, and size can be edited
56 +1*. Right-clicking a fixture on the layout will allow you to either "Duplicate" or create a "New Instance" of a fixture
57 +1**. Duplicating a fixture creates a new fixture with the same profile and properties but that will occupy different DMX addresses
58 +1**. Creating a New Instance will create a new representation of the fixture without actually creating a new fixture; this allows you to have multiple fixtures represented on the layout that share the same DMX address
59 +1.
60 +1. adsf
34 34  
35 -
36 -The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
37 -
38 38  Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
39 39  
40 40  = Device Configuration =