Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.6
edited by Alexander Mott
on 2023/05/05 18:09
Change comment: (Autosaved)
To version 1.4
edited by Alexander Mott
on 2023/05/05 17:59
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -18,23 +18,18 @@
18 18  1. Navigate to the "Project" page by clicking the Pharos logo on the left
19 19  1. Under the "Controller API" heading, verify that API Version 5.0 is selected
20 20  1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
21 -1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
22 -1. Locate your fixture in the Fixture Profile List on the right side of the Layout page
23 -1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, etc. profiles
24 -1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
21 +1. At the top left, click "Manage..." to edit the layout name, dimensions, background image, and grid settings
22 +1. The Fixture Profile Liston the right side of the Layout page shows available fixture profiles
23 +1*. For most single-channel, RGB, RGBW, warm/cool, and intensity/CCT fixtures, the generic profiles are acceptable
25 25  1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
26 -1*.
27 -1. Add fixtures to the layout by dragging from the fixture profile list and onto the layout
28 -1*. Every fixture that is added will represent a unique set of DMX addresses
29 -1*. If you want multiple fixtures represented on the layout that will
30 -1*. Note that the fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2 when a fixture is created
31 31  1.
32 32  
33 33  
34 34  The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
35 35  
36 -Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
37 37  
31 +Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™.
32 +
38 38  = Device Configuration =
39 39  
40 40  = ShowRunner™ Configuration =