Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.38
edited by Alexander Mott
on 2023/05/05 20:54
Change comment: (Autosaved)
To version 1.39
edited by Alexander Mott
on 2023/05/05 21:00
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -120,8 +120,11 @@
120 120  **** Fixture profiles with a dedicated channel for intensity (IRGB, HSI, HSIC, ICHS, etc.) will only adjust the intensity, leaving the color and color temperature unchanged
121 121  **** Fixture profiles without a dedicated intensity channel (RGB, RGBA, RGBW, etc.) will set all channels to the same intensity
122 122  *** "Dynamic White" loads are interpreted by the Pharos as an intensity and a color temperature
123 -****
124 -*** "RGB" loads are interpreted by the Pharos as a specific color value
123 +**** Fixture profiles with dedicated intensity and color temperature (HSIC, ICHS, I/CCT, etc.) will use the values sent by ShowRunner™
124 +**** Pharos will attempt to mix the DMX output for fixture profiles without dedicated intensity and color temperature channels (warm/cool, RGBW, etc.) in order to match the values sent by ShowRunner™
125 +*** "RGB" loads are interpreted by the Pharos as an intensity + specific red, green, and blue values
126 +**** Fixture profiles with a dedicated channel for intensity (IRGB, HSI, HSIC, etc.) will use the load level sent by ShowRunner™ for intensity and then mix the other channels to match the RGB values
127 +**** Fixture profiles without a dedicated intensity channel (RGB, R
125 125  * It is not possible to assign multiple Pharos groups to the same load, and it is not possible to assign multiple loads to the same group
126 126  ** To have a single load in ShowRunner™ control multiple Pharos groups, it is necessary to create a group in the Pharos project that contains the other groups and then associate the ShowRunner™ load with the super-group
127 127  ** To have