Changes for page Pharos Configuration

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -116,10 +116,12 @@
116	116	* All currently defined loads are shown on the left
117	117	** The "Group: #" of the load must match the group number as defined in the Pharos project
118	118	** The "Load Type" does not need to strictly match the fixture type as defined in the Pharos project, as the Pharos controller will do its own processing to mix the DMX output to achieve the desired color
119		-*** "Single Channel" loads are interpreted by the Pharos as "intensity only"
120		-*** "Dynamic White" loads are interpreted by the Pharos as "intensity + color temperature"
121		-**** Pharos will translate the input received from ShowRunner™ HSIC, Intensity/CCT, Warm/Cool, etc. fixture profiles in Pharos will
122		-*** "RGB" loads are interpreted by the Pharos as specific red, green, and blue values
	119	+*** "Single Channel" loads are interpreted by the Pharos as intensity only
	120	+**** Fixture profiles with a dedicated channel for intensity (IRGB, HSI, HSIC, ICHS, etc.) will only adjust the intensity, leaving the color and color temperature unchanged
	121	+**** Fixture profiles without a dedicated intensity channel (RGB, RGBA, RGBW, etc.) will set all channels to the same intensity
	122	+*** "Dynamic White" loads are interpreted by the Pharos as an intensity and a color temperature
	123	+****
	124	+*** "RGB" loads are interpreted by the Pharos as a specific color value
123	123	* It is not possible to assign multiple Pharos groups to the same load, and it is not possible to assign multiple loads to the same group
124	124	** To have a single load in ShowRunner™ control multiple Pharos groups, it is necessary to create a group in the Pharos project that contains the other groups and then associate the ShowRunner™ load with the super-group
125	125	** To have