Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.36
edited by Alexander Mott
on 2023/05/05 20:44
Change comment: (Autosaved)
To version 1.32
edited by Alexander Mott
on 2023/05/05 20:19
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -103,22 +103,10 @@
103 103  1*. If you are connecting to a controller on a Control Subnet from the LAN side of the processor, put the processor's LAN IP address followed by a colon and the external port number that corresponds to internal port 38008 of the controller. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20connect%20to%20my%20Pharos%20LPC%20on%20the%20Control%20Subnet]] for information
104 104  1. If there are multiple controllers in the project, repeat step 6 for all controllers
105 105  1. Once all controllers defined in the project have been assigned a serial number, press the "Upload" button
106 -1. Upload the project to individual controllers, or press the "Upload All" button to upload the project to all online controllers
107 107  
108 -Pharos projects can also be loaded to controllers using the web interface, but in these cases it is still necessary to assign the Serial Number of the controller to the controller that is defined in the Pharos project. Additionally, the Pharos project must be exported for upload. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20load%20my%20Pharos%20project%20using%20the%20Pharos%20web%20interface]] for details.
109 -
110 110  = ShowRunner™ Configuration =
111 111  
112 -In order to control DMX fixtures on a Pharos controller with ShowRunner™, it is necessary to make sure that the ShowRunner™ configuration has the correct settings for the Pharos controller. Under the "LightingControllers" section of the ShowRunner™ configuration, locate the entry for the Pharos controller. Under the "Properties" section, verify that the "IpAddressOrHostname" matches the IP address or hostname of the Pharos controller. The "ApiPort" only needs to be changed if the HTTP port for the Pharos controller's web server has been changed from the default 80.
109 +no feedback from dmx
113 113  
114 -Once the Properties for all Pharos controllers have been updated, load the configuration to the processor.
115 -
116 -To add Pharos loads to ShowRunner™, launch the XPanel and navigate to the Settings > Load Configuration page and then select the Pharos controller from the list of controllers on the left. Once selected, click the
117 -
118 -When creating Pharos loads in ShowRunner™, the "Load Index/Channel" of the load corresponds to the group number of a Fixture Group in the Pharos project
119 -
120 -* In the Configure Loads menu, click the
121 -* It is not possible to assign multiple Pharos groups to the same load, and it is not possible to assign multiple loads to the same group
122 -** To have a single load in ShowRunner™ control multiple Pharos groups, it is necessary to create a group in the Pharos project that contains the other groups and then associate the ShowRunner™ load with the super-group
123 -** To have
111 +
124 124  )))