Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.33
edited by Alexander Mott
on 2023/05/05 20:24
Change comment: (Autosaved)
To version 1.35
edited by Alexander Mott
on 2023/05/05 20:39
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -109,7 +109,9 @@
109 109  
110 110  = ShowRunner™ Configuration =
111 111  
112 -no feedback from dmx
112 +In order to control DMX fixtures on a Pharos controller with ShowRunner™, it is necessary to make sure that the ShowRunner™ configuration has the correct settings for the Pharos controller. Under the "LightingControllers" section of the ShowRunner™ configuration, locate the entry for the Pharos controller. Under the "Properties" section, verify that the "IpAddressOrHostname" matches the IP address or hostname of the Pharos controller. The "ApiPort" only needs to be changed if the HTTP port for the Pharos controller's web server has been changed from the default 80.
113 113  
114 -
114 +Once the Properties for all Pharos controllers have been updated, load the configuration to the processor.
115 +
116 +When creating Pharos loads in ShowRunner™, the "Load Index/Channel" of the load corresponds to the group number of a Fixture Group in the Pharos project. It is not possible to assign multiple Pharos groups to the same load, and it is not possible to assign multiple loads to the same group
115 115  )))