Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.32
edited by Alexander Mott
on 2023/05/05 20:19
Change comment: (Autosaved)
To version 1.34
edited by Alexander Mott
on 2023/05/05 20:29
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -103,10 +103,13 @@
103 103  1*. If you are connecting to a controller on a Control Subnet from the LAN side of the processor, put the processor's LAN IP address followed by a colon and the external port number that corresponds to internal port 38008 of the controller. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20connect%20to%20my%20Pharos%20LPC%20on%20the%20Control%20Subnet]] for information
104 104  1. If there are multiple controllers in the project, repeat step 6 for all controllers
105 105  1. Once all controllers defined in the project have been assigned a serial number, press the "Upload" button
106 +1. Upload the project to individual controllers, or press the "Upload All" button to upload the project to all online controllers
106 106  
108 +Pharos projects can also be loaded to controllers using the web interface, but in these cases it is still necessary to assign the Serial Number of the controller to the controller that is defined in the Pharos project. Additionally, the Pharos project must be exported for upload. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20load%20my%20Pharos%20project%20using%20the%20Pharos%20web%20interface]] for details.
109 +
107 107  = ShowRunner™ Configuration =
108 108  
109 -no feedback from dmx
112 +In order to control DMX fixtures on a Pharos controller with ShowRunner™, it is necessary to make sure that the ShowRunner™ configuration has the correct settings for the Pharos controller. Under the "LightingControllers" section of the ShowRunner™ configuration, locate the entry for the Pharos controller. Under the prop
110 110  
111 111  
112 112  )))