Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.25
edited by Alexander Mott
on 2023/05/05 19:44
Change comment: (Autosaved)
To version 1.24
edited by Alexander Mott
on 2023/05/05 19:39
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -69,15 +69,9 @@
69 69  1*. If there are multiple controllers on the job, make sure that the correct controller is selected
70 70  1*. For controllers with multiple universes, ensure that the fixtures are patched to the correct universe
71 71  1*. Fixtures can be patched to multiple addresses, but it is not possible to patch multiple fixtures to the same address
72 -1*. Fixtures can be unpatched by right clicking them in the universe
73 -1. If desired, navigate to the "Timeline" page and create timelines
74 74  
75 75  = Device Configuration =
76 76  
77 -ShowRunner™ must be able to communicate with the Pharos controller via Ethernet in order for control to work. Pharos controllers ship in DHCP mode by default, but they will sometimes fail to get an address if the controller is powered up before the DHCP server is running. If this happens, or if there is no DHCP server on the network, then it is necessary to configure the controller via USB.
78 -
79 -1. Plug in to
80 -
81 81  = ShowRunner™ Configuration =
82 82  
83 83  no feedback from dmx