Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.23
edited by Alexander Mott
on 2023/05/05 19:34
Change comment: (Autosaved)
To version 1.40
edited by Alexander Mott
on 2023/05/05 21:05
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -48,7 +48,7 @@
48 48  1. Locate the desired fixture in the Fixture Profile List on the right side of the Layout page
49 49  1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, HSIC, etc. profiles
50 50  1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
51 -1. Add fixtures to the layout by dragging them from the fixture profile list
51 +1. Add fixtures to the layout by dragging them from the Fixture Profile List
52 52  1*. Every fixture that is added to the layout represents a unique set of DMX addresses
53 53  1*. The fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
54 54  1*. Fixture properties such as name, shape, and size can be edited using the menu on the right
... ... @@ -55,7 +55,7 @@
55 55  1*. Right-clicking a fixture on the layout will allow you to either "Duplicate" or create a "New Instance" of a fixture
56 56  1**. Duplicating a fixture creates a new fixture with the same profile and properties but that will occupy different DMX addresses
57 57  1**. Creating a New Instance will create a new representation of the fixture without actually creating a new fixture; this allows you to have multiple fixtures represented on the layout that share the same DMX address
58 -1. Create Fixture Groups by clicking the folder icon above the list of fixtures on the left or by right clicking an empty area in the fixture list
58 +1. Create Fixture Groups by clicking the folder icon above the Fixture List on the left or by right clicking an empty area in the Fixture List
59 59  1*. Fixture Groups will correspond to individual loads in ShowRunner™
60 60  1*. When a new Fixture Group is created, all currently selected fixtures are automatically added to the group
61 61  1**. Clicking a fixture on the layout or in the fixture list will select just that fixture
... ... @@ -62,16 +62,76 @@
62 62  1**. Ctrl-clicking a fixture will add or remove it from the current selection
63 63  1**. Ctrl-dragging on the layout will add multiple fixtures to the current selection
64 64  1**. Shift-dragging on the layout will select just the highlighted fixtures
65 -1*. Fixtures can be removed from a group by right clicking them under the group in the fixture list
66 -1*. Fixtures can be added to an existing group by selecting them and then dragging them to the group in the fixture list
65 +1*. Fixtures can be removed from a group by right clicking them under the group in the Fixture List
66 +1*. Fixtures can be added to an existing group by selecting and then dragging them to a group in the Fixture List
67 67  1. Once all fixtures have been laid out and grouped, navigate to the "Patch" page
68 -1.
68 +1. Patch fixtures by dragging them from the fixture list onto the DMX universe
69 +1*. If there are multiple controllers on the job, make sure that the correct controller is selected
70 +1*. For controllers with multiple universes, ensure that the fixtures are patched to the correct universe
71 +1*. Fixtures can be patched to multiple addresses, but it is not possible to patch multiple fixtures to the same address
72 +1*. Fixtures can be unpatched by right clicking them in the universe
73 +1. If desired, navigate to the "Timeline" page and create timelines
69 69  
70 70  = Device Configuration =
71 71  
77 +ShowRunner™ must be able to communicate with the Pharos controller via Ethernet in order for control to work. Pharos controllers ship in DHCP mode by default, but they will sometimes fail to get an address if the controller is powered up before the DHCP server is running. If this happens, or if there is no DHCP server on the network, then it is necessary to configure the controller via USB:
78 +
79 +1. Open Pharos Designer 2 or an existing Pharos project
80 +1. Connect to the Pharos controller using the USB-B port on the front of the controller
81 +1. Navigate to the "Network" page
82 +1. Select the Pharos controller from the list
83 +1*. If a Pharos project is open, controllers defined in the project will be displayed above the list of online controllers
84 +1*. If there are multiple online controllers, use the "Beacon" function to flash all the LEDs on the front of the controller and verify the correct one is selected
85 +1. If the Pharos Designer 2 version is different than the firmware on the Pharos controller, then it is necessary to either update the controller by pressing the "Reload Firmware" button, or downgrade Pharos Designer 2 by downloading the appropriate version from Pharos Controls' website
86 +1. Press the "Configure" button to open the network configuration menu
87 +1. Set DHCP mode to Static and configure the IP address, IP mask, default gateway, and DNS servers as required for your network
88 +
89 +Once the Pharos controller is online, it is necessary to load the Pharos project to the controller:
90 +
91 +1. Open the Pharos project in Pharos Designer 2
92 +1. Connect to the network that the Pharos controller is on, or connect to the controller directly via USB
93 +1. Navigate to the "Network" page in Pharos Designer 2
94 +1. Verify that all online controllers have firmware that matches the version of Pharos Designer 2 you are running, and update them if necessary
95 +1*. Online controllers are displayed below the list of controllers that are defined in the project
96 +1*. If you do not see the controller online and you are hard-wired to the same network as the controller, verify that the controller has the correct IP settings
97 +1*. If the controller is on a Control Subnet and you are connecting via the LAN, [[verify that port forwarding has been configured>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20connect%20to%20my%20Pharos%20LPC%20on%20the%20Control%20Subnet]] and proceed to the next step
98 +1*. If you do not see the controller online, but you are connecting to it over a routed network, proceed to the next step
99 +1. Select a controller that is defined in the project
100 +1. In the Properties menu on the right, click the Serial Number dropdown menu and select the SN corresponding to the controller
101 +1*. If you do not see the corresponding serial number, click the "Find..." button
102 +1*. If you are connecting to the controller over a routed network, put the controller's IP address into this field
103 +1*. If you are connecting to a controller on a Control Subnet from the LAN side of the processor, put the processor's LAN IP address followed by a colon and the external port number that corresponds to internal port 38008 of the controller. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20connect%20to%20my%20Pharos%20LPC%20on%20the%20Control%20Subnet]] for information
104 +1. If there are multiple controllers in the project, repeat step 6 for all controllers
105 +1. Once all controllers defined in the project have been assigned a serial number, press the "Upload" button
106 +1. Upload the project to individual controllers, or press the "Upload All" button to upload the project to all online controllers
107 +
108 +Pharos projects can also be loaded to controllers using the web interface, but in these cases it is still necessary to assign the Serial Number of the controller to the controller that is defined in the Pharos project. Additionally, the Pharos project must be exported for upload. See our [[FAQ>>https://wiki.chiefintegrations.com/FAQ/I%20can%27t%20load%20my%20Pharos%20project%20using%20the%20Pharos%20web%20interface]] for details.
109 +
72 72  = ShowRunner™ Configuration =
73 73  
74 -no feedback from dmx
112 +In order to control DMX fixtures on a Pharos controller with ShowRunner™, it is necessary to make sure that the ShowRunner™ configuration has the correct settings for the Pharos controller. Under the "LightingControllers" section of the ShowRunner™ configuration, locate the entry for the Pharos controller. Under the "Properties" section, verify that the "IpAddressOrHostname" matches the IP address or hostname of the Pharos controller. The "ApiPort" only needs to be changed if the HTTP port for the Pharos controller's web server has been changed from the default 80. Once the Properties for all Pharos controllers have been updated, load the configuration to the processor.
75 75  
76 -
114 +To add Pharos loads to ShowRunner™, launch the XPanel and navigate to the Settings > Load Configuration page and then select the Pharos controller from the list of controllers on the left. Once the controller is selected, press the "Configure Loads" button:
115 +
116 +* All currently defined loads are shown on the left
117 +** The "Group: #" of the load must match the group number as defined in the Pharos project
118 +* To add a new load to ShowRunner™, press "Add New Load" below the list of loads
119 +** The "Load Index/Channel" must match the group number as defined in the Pharos project
120 +*** Since ShowRunner™ uses group-level commands and fixtures in a group aren't necessarily on the same DMX universe, the "Universe ID" is grayed out and cannot be modified
121 +** The "Load Type" does not need to strictly match the fixture type as defined in the Pharos project, as the Pharos controller will do its own processing to mix the DMX output to achieve the desired color
122 +*** "Single Channel" loads are interpreted by the Pharos as intensity only 
123 +**** Fixture profiles with a dedicated channel for intensity (IRGB, HSI, HSIC, ICHS, etc.) will only adjust the intensity channel, leaving the color and color temperature unchanged
124 +**** Fixture profiles without a dedicated intensity channel (RGB, RGBA, RGBW, etc.) will set all channels to the same intensity value sent by ShowRunner™
125 +*** "Dynamic White" loads are interpreted by the Pharos as an intensity and a color temperature
126 +**** Fixture profiles with dedicated intensity and color temperature (HSIC, ICHS, I/CCT, etc.) will use the values sent by ShowRunner™
127 +**** Pharos will attempt to mix the DMX output for fixture profiles without dedicated intensity and color temperature channels (warm/cool, RGBW, etc.) in order to match the values sent by ShowRunner™
128 +*** "RGB" loads are interpreted by the Pharos as an intensity + specific red, green, and blue values
129 +**** Fixture profiles with a dedicated channel for intensity (IRGB, HSI, HSIC, etc.) will use the load level sent by ShowRunner™ for intensity and then mix the other channels to match the RGB values
130 +**** Fixture profiles without a dedicated intensity channel (RGB, RGBW, etc.) will mix the intensities for each color to attempt to match the color and overall intensity sent by ShowRunner™
131 +* It is not possible to assign multiple Pharos groups to the same load, and it is not possible to assign multiple loads to the same group
132 +** To have a single load in ShowRunner™ control multiple Pharos groups, it is necessary to create a group in the Pharos project that contains the other groups and then associate the ShowRunner™ load with the super-group
133 +** To have
134 +
135 +
136 +note no feeback
77 77  )))