Changes for page Pharos Configuration

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,56 +10,23 @@
10	10
11	11	Pharos projects are created using the free Pharos Designer 2 software from Pharos Controls. When creating a project for use with ShowRunner™, ensure that API version 5.0 is selected for the project. Individual loads control from ShowRunner™ is achieved with group-level commands using the Pharos Controller API, so each Fixture Group defined in the Pharos Project should correspond to a single load in ShowRunner™. In addition to group-level commands, ShowRunner™ also supports mapping ShowRunner™ Scenes to Pharos Timelines.
12	12
13		-When creating a Pharos project for a ShowRunner™ installation, there are several things to consider:
14		-
15		-* Individual loads defined in ShowRunner™ send commands to individual Fixture Groups in Pharos
16		-* Scenes in ShowRunner™ can be mapped in order to trigger Timelines in Pharos
17		-* The Pharos API limits group-level commands to intensity, intensity/RGB, and intensity/CCT(% class="row" %)
18		-(((
19		-(% class="col-xs-8" %)
20		-(((
21		-(% class="table-condensed" %)
22		-|(% style="width:244px" %)**ShowRunner™ Load Type**|(% style="width:244px" %)**Pharos API Command**
23		-|(% style="width:244px" %)Single-Channel|(% style="width:244px" %)Intensity
24		-|(% style="width:244px" %)RGB|(% style="width:244px" %)Intensity/RGB
25		-|(% style="width:244px" %)Dynamic White|(% style="width:244px" %)Intensity/CCT
26		-)))
27		-)))
28		-* The Pharos controller does any necessary processing to adapt these commands for the fixtures
29		-** For example, if Pharos receives an RGB command for a group containing RGB, HSI, and HSIC fixtures, it will do its best to make sure that the output color is consistent across all the different fixture types
30		-** Certain manufacturer-specific fixture Profiles exist in order to help the Pharos controller achieve a consistent output across multiple different fixture types
31		-* If it is desired to control the white channel separately from the RGB channels of an RGBW fixture, then it must be defined in the Pharos project as two separate RGB and W fixtures that are grouped separately and defined separately in ShowRunner™
32		-* Fixtures can belong to multiple Fixture Groups, allowing ShowRunner™ to send different types of command (e.g. RGB vs CCT) to the same fixture
33		-** Useful for certain situations, such as HSIC fixtures that need to be controlled as color-changing (RGB) in some situations but dynamic white (intensity/CCT) in others
34		-
35	35	The basic steps for creating a Pharos Project for use with ShowRunner™ are:
36	36
37	37	1. Open the Pharos Designer 2 software
38	38	1. In the top-right, click "New Project" and select the type of Pharos controller that will be the primary controller
39	39	1*. Crestron SKUs DIN-DMX-1UNIVERSE and DIN-DMX-2UNIVERSE both correspond to "LPC" in Pharos
40		-1. Navigate to the "Project" page by clicking the Pharos logo on the left
	18	+1. Navigate to the "Project" page
41	41	1. Under the "Controller API" heading, verify that API Version 5.0 is selected
42		-1. Navigate to the "Network" page by clicking the network icon on the left
43		-1. Select "Controller 1" and verify that the number of universes in the "Properties" menu matches the controller that was ordered for the job
44		-1. If required, click the "New Controller..." button to add additional Pharos controllers
45		-1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
46		-1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
47		-1. Locate the desired fixture in the Fixture Profile List on the right side of the Layout page
48		-1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, HSIC, etc. profiles
49		-1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
50		-1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
51		-1. Add fixtures to the layout by dragging them from the fixture profile list
52		-1*. Every fixture that is added to the layout represents a unique set of DMX addresses
53		-1*. The fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
54		-1*. Fixture properties such as name, shape, and size can be edited
55		-1*. Right-clicking a fixture on the layout will allow you to either "Duplicate" or create a "New Instance" of a fixture
56		-1**. Duplicating a fixture creates a new fixture with the same profile and properties but that will occupy different DMX addresses
57		-1**. Creating a New Instance will create a new representation of the fixture without actually creating a new fixture; this allows you to have multiple fixtures represented on the layout that share the same DMX address
	20	+1. Navigate to the "Layout" page
	21	+1. At the top left, click "Manage..." to edit the layout name, dimensions, background image, and grid settings
58	58	1.
59		-1. adsf
60	60
61		-Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
62	62
	25	+The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
	26	+
	27	+
	28	+Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™.
	29	+
63	63	= Device Configuration =
64	64
65	65	= ShowRunner™ Configuration =