Skip to Content

Changes for page Pharos Configuration

Last modified by Alexander Mott on 2024/02/26 15:10
From version 1.17
edited by Alexander Mott
on 2023/05/05 19:04
Change comment: (Autosaved)
To version 1.18
edited by Alexander Mott
on 2023/05/05 19:09
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -27,9 +27,9 @@
27 27  )))
28 28  * The Pharos controller does any necessary processing to adapt these commands for the fixtures
29 29  ** For example, if Pharos receives an RGB command for a group containing RGB, HSI, and HSIC fixtures, it will do its best to make sure that the output color is consistent across all the different fixture types
30 -* Fixture Groups defined as single-channel loads in ShowRunner™
31 -* For RGBW fixtures, it may be a good idea to define them as separate RGB and W fixtures so that ShowRunner™ is able to control the white channel separately from the RGB channels
32 -* Fixtures can belong to multiple Fixture Groups, allowing ShowRunner™ to send different types (e.g. RGB vs CCT) of command to the same fixture 
30 +** Certain manufacturer-specific fixture Profiles exist in order to help the Pharos controller achieve a consistent output across multiple different fixture types
31 +* If it is desired to control the white channel separately from the RGB channels of an RGBW fixture, then it must be defined in the Pharos project as two separate RGB and W fixtures that are grouped separately and defined separately in ShowRunner™
32 +* Fixtures can belong to multiple Fixture Groups, allowing ShowRunner™ to send different types of command (e.g. RGB vs CCT) to the same fixture 
33 33  ** Useful for certain situations, such as HSIC fixtures that need to be controlled as color-changing (RGB) in some situations but dynamic white (intensity/CCT) in others
34 34  
35 35  The basic steps for creating a Pharos Project for use with ShowRunner™ are: