Changes for page Pharos Configuration

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -8,46 +8,16 @@
8	8
9	9	= Pharos Project =
10	10
11		-Pharos projects are created using the free Pharos Designer 2 software from Pharos Controls. When creating a project for use with ShowRunner™, ensure that API version 5.0 is selected for the project. Individual loads control from ShowRunner™ is achieved with group-level commands using the Pharos Controller API, so each Fixture Group defined in the Pharos Project should correspond to a single load in ShowRunner™. In addition to group-level commands, ShowRunner™ also supports mapping ShowRunner™ Scenes to Pharos Timelines.
	11	+Pharos projects are created using the free Pharos Designer 2 software from Pharos Controls. When creating a project for use with ShowRunner™, ensure that API version 5.0 is selected for the project. ShowRunner™ sends group-level commands over the Pharos Controller API, so each Fixture Group in Pharos will correspond to
12	12
13		-When creating a Pharos project for a ShowRunner™ installation, there are several things to consider:
	13	+1. Download the Pharos Designer 2 software from Ph
14	14
15		-* The Pharos API limits commands to single-channel (intensity), RGB, and intensity/CCT
16		-* ShowRunner™ uses group-level commands, so each individual load in ShowRunner™ must have a corresponding Fixture Group in Pharos
17		-* Fixture Groups defined as single-channel loads in ShowRunner™
18		-* For RGBW fixtures, it may be a good idea to define them as separate RGB and W fixtures so that ShowRunner™ is able to control the white channel separately from the RGB channels
19		-* Fixtures can belong to multiple Fixture Groups, allowing ShowRunner™ to send different types (e.g. RGB vs CCT) of command to the same fixture
20		-** Useful for certain situations, such as HSIC fixtures that need to be controlled as color-changing (RGB) in some situations but dynamic white (intensity/CCT) in others
21	21
22		-The basic steps for creating a Pharos Project for use with ShowRunner™ are:
	16	+The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
23	23
24		-1. Open the Pharos Designer 2 software
25		-1. In the top-right, click "New Project" and select the type of Pharos controller that will be the primary controller
26		-1*. Crestron SKUs DIN-DMX-1UNIVERSE and DIN-DMX-2UNIVERSE both correspond to "LPC" in Pharos
27		-1. Navigate to the "Project" page by clicking the Pharos logo on the left
28		-1. Under the "Controller API" heading, verify that API Version 5.0 is selected
29		-1. Navigate to the "Network" page by clicking the network icon on the left
30		-1. Select "Controller 1" and verify that the number of universes in the "Properties" menu matches the controller that was ordered for the job
31		-1. If required, click the "New Controller..." button to add additional Pharos controllers
32		-1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
33		-1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
34		-1. Locate the desired fixture in the Fixture Profile List on the right side of the Layout page
35		-1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, HSIC, etc. profiles
36		-1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
37		-1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
38		-1. Add fixtures to the layout by dragging them from the fixture profile list
39		-1*. Every fixture that is added to the layout represents a unique set of DMX addresses
40		-1*. The fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
41		-1*. Fixture properties such as name, shape, and size can be edited
42		-1*. Right-clicking a fixture on the layout will allow you to either "Duplicate" or create a "New Instance" of a fixture
43		-1**. Duplicating a fixture creates a new fixture with the same profile and properties but that will occupy different DMX addresses
44		-1**. Creating a New Instance will create a new representation of the fixture without actually creating a new fixture; this allows you to have multiple fixtures represented on the layout that share the same DMX address
45		-1.
46		-1. adsf
47	47
	19	+Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™.
48	48
49		-Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
50		-
51	51	= Device Configuration =
52	52
53	53	= ShowRunner™ Configuration =