Changes for page Pharos Configuration

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -15,36 +15,18 @@
15	15	1. Open the Pharos Designer 2 software
16	16	1. In the top-right, click "New Project" and select the type of Pharos controller that will be the primary controller
17	17	1*. Crestron SKUs DIN-DMX-1UNIVERSE and DIN-DMX-2UNIVERSE both correspond to "LPC" in Pharos
18		-1. Navigate to the "Project" page by clicking the Pharos logo on the left
	18	+1. Navigate to the "Project" page
19	19	1. Under the "Controller API" heading, verify that API Version 5.0 is selected
20		-1. Navigate to the "Network" page by clicking the network icon on the left
21		-1. Select "Controller 1" and verify t
22		-1. Navigate to the "Layout" page by clicking the pencil and ruler icon on the left
23		-1. At the top left, click "Manage..." to edit the layout name and dimensions, modify grid settings, and upload a background image if desired
24		-1. Locate the desired fixture in the Fixture Profile List on the right side of the Layout page
25		-1*. Most fixtures can be controlled correctly using the generic single-channel, RGB, warm/cool, intensity/CCT, HSIC, etc. profiles
26		-1*. Pharos also has a large selection of manufacturer-specific profiles which can be used instead of the generics
27		-1*. Additional generic and manufacturer-specific profiles can be downloaded by clicking the cloud icon on the right, above the fixture profile list
28		-1. Prior to adding fixtures to the layout, consider the following:
29		-1*. ShowRunner™ uses group-level commands, so each individual load in ShowRunner™ must have a corresponding Fixture Group in Pharos
30		-1*. The Pharos API limits commands to single-channel (intensity), RGB, or Intensity/CCT
31		-1*. For RGBW fixtures, it may be a good idea to define them as separate RGB and W fixtures so that ShowRunner™ is able to control the white channel separately from the RGB channels
32		-1*. Fixtures can belong to multiple Fixture Groups
33		-1**. This allows ShowRunner™ to send different types of commands to the same fixtures
34		-1**. Useful for certain situations, such as HSIC fixtures that need to be controlled as color-changing (RGB) in some situations but dynamic white (intensity/CCT) in others
35		-1. Add fixtures to the layout by dragging them from the fixture profile list
36		-1*. Every fixture that is added to the layout represents a unique set of DMX addresses
37		-1*. The fixture number is different than the fixture address, and is automatically incremented by Pharos Designer 2
38		-1*. Fixture properties such as name, shape, and size can be edited
39		-1*. Right-clicking a fixture on the layout will allow you to either "Duplicate" or create a "New Instance" of a fixture
40		-1**. Duplicating a fixture creates a new fixture with the same profile and properties but that will occupy different DMX addresses
41		-1**. Creating a New Instance will create a new representation of the fixture without actually creating a new fixture; this allows you to have multiple fixtures represented on the layout that share the same DMX address
	20	+1. Navigate to the "Layout" page
	21	+1. At the top left, click "Manage..." to edit the layout name, dimensions, background image, and grid settings
42	42	1.
43		-1. adsf
44	44
45	45
46		-Note: Due to limitations with the API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™. Other fixture types are controllable, but the types of command that ShowRunner™
	25	+The Pharos project layout can be as simple or as complicated as desired as long as the fixtures are grouped in a way that is compatible with ShowRunner™
47	47
	27	+
	28	+Due to limitations with the Pharos API, only single channel, RGB, or Intensity/CCT load types can be defined in ShowRunner™.
	29	+
48	48	= Device Configuration =
49	49
50	50	= ShowRunner™ Configuration =