Skip to Content

Changes for page Startup Checklist

Last modified by Alexander Mott on 2024/12/02 19:09
From version 7.1
edited by Alexander Mott
on 2023/05/19 16:24
Change comment: There is no comment for this version
To version 5.1
edited by Scott Kohlmann
on 2023/04/20 22:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.scott\.kohlmann@chiefintegrations\.com
Content
... ... @@ -19,29 +19,21 @@
19 19  ** Poll Cresnet and verify devices are online in Toolbox
20 20  ** Assign Cresnet IDs to devices and verify they are reporting online to ShowRunnerCLC™
21 21  ** Verify load schedule and fixture functionality
22 -*** Toggle each load individually and verify they dim and switch correctly
23 23  *** Verify loads are assigned to correct areas
23 +*** Verify loads dim and switch correctly
24 24  *** Assign friendly load labels as necessary
25 -*** Use the "Verification" checkbox to add a verified timestamp to the load
26 26  ** Verify occupancy sensors
27 27  *** Verify correct area assignments
28 -*** Verify correct direct load assignments if necessary
29 29  *** Adjust timeouts and sensitivities as necessary
30 30  ** Verify keypad functionality
31 31  *** Verify correct area assignments
32 32  *** Verify correct button layouts and functionality
33 -*** Configure keypad actions as necessary
34 34  ** Verify photocell functionality
35 -*** Verify photocells respond to changes in light levels
36 36  *** Assign photocells to appropriate lighting zones and enable for required scenes
37 37  *** Adjust sensitivity as necessary
38 38  ** Verify partition sensor functionality
39 39  *** Verify correct area assignments
40 -*** Adjust sensitivity as required for consistent partition detection
41 -** Configure Area-level sequence of operations
42 -*** Occupancy/vacancy mode
43 -*** Occupied/vacant scenes
44 -*** Scene levels
36 +*** Adjust sensitivity as required
45 45  ** Set up any schedules as required per the sequence of operations
46 46  ** Complete functionality test (QC, make sure each room functions from an end-user perspective)
47 47  ** End-user training