Skip to Content
Last modified by Alexander Mott on 2024/09/13 16:45
From version 4.1
edited by Alexander Mott
on 2022/06/21 16:56
Change comment: There is no comment for this version
To version 6.1
edited by Alexander Mott
on 2022/06/22 15:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -17,17 +17,19 @@
17 17  * Launch the SHOWRUNNER™ XPanel UI and connect to the processor
18 18  * Navigate to Settings>Device Addressing
19 19  * This page lists all devices that are defined in the program, sorted by ID:
20 -[[image:1655828296124-885.png||height="372" width="638"]]
21 -** "Model" column indicates the expected device model (e.g. C2N-CBD-P, GLPP-DIMFLVCN-PM, GLPP-1DIMFLV2CN-PM, etc.)
22 -** "Description" gives the Global ID and label for any associated devices (including any non-system sensors)
23 -** "ID" lists the device address in the form: ##[HostDeviceID]**-**[HostBranch]**:**[ConnectionID]##
24 -*** Devices with no host (i.e. directly landed on the processor) will only have the Connection ID listed
25 -** "Serial Number" must be populated with the device serial number
26 -*** On a new installation, this column will not be populated
27 -** "Verified" checkbox will appear once certain conditions are met:
28 -*** There is a device reporting online at the given ID/Address
29 -*** The model of the device reporting online matches the model defined in the program
30 -*** The serial number of the device reporting online matches the serial number defined in the program
20 +
21 + [[image:1655828296124-885.png||height="372" width="638"]]
22 +
23 +* "Model" column indicates the expected device model (e.g. C2N-CBD-P, GLPP-DIMFLVCN-PM, GLPP-1DIMFLV2CN-PM, etc.)
24 +* "Description" gives the Global ID and label for any associated devices (including any non-system sensors)
25 +* "ID" lists the device address in the form: ##[HostDeviceID]**-**[HostBranch]**:**[ConnectionID]##
26 +** Devices with no host (i.e. directly landed on the processor) will only have the Connection ID listed
27 +* "Serial Number" must be populated with the device serial number
28 +** On a new installation, this column will not be populated
29 +* "Verified" checkbox will appear once certain conditions are met:
30 +** There is a device reporting online at the given ID/Address
31 +** The model of the device reporting online matches the model defined in the program
32 +** The serial number of the device reporting online matches the serial number defined in the program
31 31  * Fill in the "Serial Number" column with serial numbers provided by the electrical contractor
32 32  ** If the EC did not provide serial numbers, it may be easier to [[identify and address devices through Toolbox>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Addressing Devices from Toolbox.WebHome]]
33 33  ** Note that there is sometimes a rendering issue which will make it appear as though serial numbers disappeared or moved between devices. This issue is graphical only, and does not affect addressing
... ... @@ -40,7 +40,7 @@
40 40  * There should be check boxes next to "Models Match", "SN Match", and "Online". All three boxes must be checked for the "Verified" check mark to appear
41 41  ** If the "Models Match" check mark is missing, verify that the reported model matches the model in the configuration
42 42  ** If the "SN Match" check mark is missing, verify that you have the correct serial number entered
43 -*** If there is a "Capture Reported Serial Number" button next to the "Serial Number" field, it can be used to record the serial number of the device
45 +*** If there is a "Capture Reported Serial Number" button next to the "Serial Number" field, it can be used to record the serial number of the device to see what the serial number is for the device currently at that address.
44 44  ** If the "Online" check mark is missing, then there is no device reporting online at that Host Device/Branch and Connection ID
45 45  * As of June 2022, issues have been reported with Crestron's Device Database that results in processors being unable to properly query devices:
46 46  ** Run the command ##broadcast on## command in Text Console