Skip to Content
Last modified by Alexander Mott on 2024/09/13 16:45
From version 10.1
edited by Alexander Mott
on 2022/06/22 15:30
Change comment: There is no comment for this version
To version 16.1
edited by Alexander Mott
on 2023/05/16 14:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,6 @@
1 -=== Overview ===
1 +{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
2 +{{toc/}}
3 +{{/box}}
2 2  
3 3  All Crestron lighting control programs function on the same basic principles with regard to addressing devices. The lighting control program maintains an internal database of controlled hardware (i.e. load controllers, keypads, sensors, etc.) which are each given a unique //address//. These unique addresses, as defined in the program, include the //device connection ID// (a.k.a. Cresnet ID) of the controlled device, the //device host id// (i.e., the ID of the device where the Cresnet or Zūm Link cable is landed), and the //device host branch// (for cases where the host device has multiple Nets, such as the DIN-CENCN-2).
4 4  
... ... @@ -6,15 +6,15 @@
6 6  
7 7  Serial numbers should be collected by the electrical contractor during installation and provided to the lighting controls technician prior to startup.
8 8  
9 -=== Addressing Devices in SHOWRUNNER™ ===
11 += Addressing Devices in ShowRunnerCLC™ =
10 10  
11 -Cresnet devices can be addressed from the SHOWRUNNER™ UI if their serial numbers are known. (Note that Zūm Wired devices cannot currently be addressed from the SHOWRUNNER™ UI because their serial numbers cannot be directly translated into TSIDs. Instead, they must be [[addressed through Toolbox>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Addressing Devices from Toolbox.WebHome]].)
13 +Cresnet devices can be addressed from the ShowRunnerCLC™ UI if their serial numbers are known. (Note that Zūm Wired devices cannot currently be addressed from the ShowRunnerCLC™ UI because their serial numbers cannot be directly translated into TSIDs. Instead, they must be [[addressed through Toolbox>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Addressing Devices from Toolbox.WebHome]].)
12 12  
13 -To address devices in the SHOWRUNNER™ UI:
15 +To address devices in the ShowRunnerCLC™ UI:
14 14  
15 15  * [[Configure the processor and load the configuration file>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.WebHome]]
16 16  * If other network devices are present, [[they should also be configured>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.WebHome]]
17 -* Launch the SHOWRUNNER™ XPanel UI and connect to the processor
19 +* Launch the ShowRunnerCLC™ XPanel UI and connect to the processor
18 18  * Navigate to Settings>Device Addressing
19 19  * This page lists all devices that are defined in the program, sorted by ID:
20 20  .[[image:1655828296124-885.png||height="372" width="638"]]