Wiki source code of *Addressing Devices from Toolbox
Version 15.1 by Alexander Mott on 2023/12/18 23:12
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | {{box cssClass="floatinginfobox" title="**CONTENTS**"}} | ||
| 2 | {{toc/}} | ||
| 3 | {{/box}} | ||
| 4 | |||
| 5 | Introduction | ||
| 6 | |||
| 7 | = Network Device Tree View = | ||
| 8 | |||
| 9 | (% class="box warningmessage" %) | ||
| 10 | ((( | ||
| 11 | Crestron Toolbox versions 3.12.2 (3.1220.0018) and 3.12.2p1 (3.1221.0004) have a bug with device addressing from the Network Device Tree View tool (all devices at a Cresnet ID will be re-addressed when attempting to change the address of a single device) | ||
| 12 | Check the currently installed version of Toolbox by navigating to Help > About Crestron Toolbox... and upgrade or downgrade your installation as necessary, or use an alternate method of addressing devices | ||
| 13 | ))) | ||
| 14 | |||
| 15 | = Text Console = | ||
| 16 | |||
| 17 | Command for processor/no nets | ||
| 18 | |||
| 19 | Command for devices with nets (DIN-CENCN-2/ZUMNET) | ||
| 20 | |||
| 21 | Command for RFID | ||
| 22 | |||
| 23 | = Troubleshooting Tips and Tools = | ||
| 24 | |||
| 25 | == General Tips == | ||
| 26 | |||
| 27 | Verify correct connection point | ||
| 28 | |||
| 29 | Isolate cables | ||
| 30 | |||
| 31 | Check for cabling loops | ||
| 32 | |||
| 33 | == Network Analyzer Tool == | ||
| 34 | |||
| 35 | == DIN-CENCN-2 Specific Tips == |