Last modified by Alexander Mott on 2023/12/19 00:37
From version 13.1
edited by Alexander Mott
on 2023/12/18 21:39
Change comment: There is no comment for this version
To version 5.1
edited by Alexander Mott
on 2022/09/16 23:38
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -*Addressing Devices from Toolbox
1 +Addressing Devices from Toolbox
Hidden
... ... @@ -1,1 +1,1 @@
1 -true
1 +false
Content
... ... @@ -1,35 +1,13 @@
1 -{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
1 +{{box title="**CONTENTS**"}}
2 2  {{toc/}}
3 3  {{/box}}
4 4  
5 -Introduction
5 += Overview =
6 6  
7 7  = Network Device Tree View =
8 8  
9 -(% class="box warningmessage" %)
10 -(((
11 -Crestron Toolbox versions 3.12.2 (3.1220.0018) and 3.12.2p1 (3.1221.0004) have a bug with device addressing from the Network Device Tree View tool (all devices at a Cresnet ID will be re-addressed when attempting to change the address of a single device)
12 -Check the currently installed version of Toolbox by navigating to Help > About Crestron Toolbox... and upgrade or downgrade your installation as necessary, or use an alternate method of addressing devices
13 -)))
14 -
15 15  = Text Console =
16 16  
17 -Command for processor/no nets
11 += Capturing Serial Numbers In the UI =
18 18  
19 -Command for devices with nets (DIN-CENCN-2/ZUMNET)
20 -
21 -Command for RFID
22 -
23 -= Troubleshooting Tips and Tools =
24 -
25 -== General Tips ==
26 -
27 -Verify correct connection point
28 -
29 -Isolate cables
30 -
31 -Check for cabling loops
32 -
33 -== Network Analyzer Tool ==
34 -
35 -== DIN-CENCN-2 Specific Tips ==
13 +[[image:1655911608080-129.png]]