Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 6.1
edited by Scott Kohlmann
on 2021/12/21 00:27
Change comment: There is no comment for this version
To version 5.1
edited by Scott Kohlmann
on 2021/12/14 22:34
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -26,7 +26,7 @@
26 26  * Select the PUF file again if needed, connect to the processor using the pencil, and select Recheck (This verifies the need to install the program, the XPanel UI, and the Crestron App UI)
27 27  * Click Update when prompted to install ShowRunner
28 28  * After loading, you can connect to the UI by navigating to the processor’s IP.  
29 -** **3-Series processors require authentication enabled** (SSL self can be used but steps will need to be repeated).
29 +** 3-Series processors require authentication enabled or SSL self
30 30  ** If stuck on "Connecting to Processor" you will need to accept the certificate.
31 31  * Showrunner™ will be loaded but a configuration and license are still needed.  Please proceed with the next section.
32 32  
... ... @@ -36,8 +36,8 @@
36 36  * Obtain and download the license from [[https:~~/~~/portal.chiefintegrations.com>>url:https://portal.chiefintegrations.com]]
37 37  * Navigate to the showrunner™ management page
38 38  * Login to the showrunnerHUB™
39 -** 4-Series processor: The login created by the processor will work
40 -** 3-Series processor: Using Toolbox Text Console - type "sradmin [username] [name] administrators [password]"  (not needed if processor authentication is setup)
39 +** 4-Series: The login created by the processor will work
40 +** 3-Series: Using Toolbox Text Console - type "sradmin [username] [name] administrators [password]
41 41  * Click Setup then File Management
42 42  * [[image:MicrosoftTeams-image7c355557d0a3ae410e72498ee667de2df50226f3e3940c2df4b51bb7137e176b.png||height="240" width="250"]]
43 43  ** Under “Upload New License File”
... ... @@ -55,7 +55,7 @@
55 55  
56 56  * Set the TSW 770's IP Address per your network requirements (If using a panel other than TSW-770 you will need the CI_ShowRunner-UI_v3.xx PUF)
57 57  * Connect the PUF (CI_ShowRunner_v3.xx) to the TSW to load the UI
58 -** Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770.  
58 +** Only add CI_ShowRunner-UI_v3.xx if using touch panel other than TSW-770. 
59 59  * When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
60 60  ** You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.
61 61  
... ... @@ -64,5 +64,5 @@
64 64  * When GLPACs are deployed Chief Integrations will provide a load script that loads and configures the GLPAC hardware.  The script includes Chief Integrations chosen IP addresses unless otherwise requested.
65 65  * Set the IP addresses on all GLPACs per your network requirements.  The script will need to be updated if IP Addresses are changed from Chief Integrations chosen IP Addresses.
66 66  * Using Toolbox -> Script Manager, select the Scripting dropdown or right click and select “Load Script”.  Find the text file provided.
67 -* Provided the given IPs can be seen on the network, double or right clicking an entry will load the program and link the IP table, enabling control through showrunner™
67 +* Provided the given IPs can be seen on the network, double or right clicking an entry will load the program and link the IP table, enabling control through ShowRunner
68 68  * Say yes to the dialog warning the hardware does not match (if prompted), and yes to overwrite the IP table (if prompted)